Pipe Rolling machine (TNC type)
Pipe Rolling machine (TNC type)

 

Pipe Rolling machine (TNC type)

Innochamp Machine Tools Sdn Bhd flag
Kategori: Kehabisan Stok
Untuk informasi lebih lanjut, kunjungi situs resmi kami di innochamp.com.my
Kunjungi Situs Resmi Hubungi Kami
Deskripsi

Characteristics of TNC Rolling Machine:
Hydraulic control of the three Main shaft driver and curvature gives stabilization to the machine.
The adoption of grating ruler makes adjusting scope more precise and convenient. Adopt raster ruler to adjust curvature scope, accurate control, can numerical set.
Adopt touch control screen and PLC control system with advanced technology and Chinese and English version.
Can counting the process amount at any moment.
All bending inputted data can save in system for ever and use it at any time.
Possess the function of manual semi-auto and automatic operation. It is very convenient to bend diversified pipes.
Can process varies of metal material like angle iron, flat steel, round pipe and other material of different section if change the groove of bending dies.
 
Technical Specification of TNC Rolling Machine (1):
Model KM-JW10 KM-JW20 KM-JW30 KM-JW40 KM-JW50 KM-JW75 KM-JW89 KM-JW100 KM-JW115 KM-JW159
Max. Section Modulus of elasticity (cm³) 0.8 1.5 2 4 6 23 35 53 59 119
Rolling Speed (m/min) 7.8 7.8 7 7 6 5
Bend limit(MPa) δs=250
Round Pipe Max. OD 19.5 25.4 31.75 38.1 42 76 89 89 114 159
wall thickness 1.5 1.5 2 2.5 4 4.5 5 8 5 5
min.bending dia. 200 380 480 500 500 900 1100 1100 1250 1800
Round Bar Max. OD 12 16 20 28 30 50 55 65 70 85
min.bending dia. 200 260 300 350 450 600 600 800 1000 1100
Square Pipe max.section 20×20 25×25 30×30 40×40 45 70 80 90 90 100
wall thickness 1.5 1.5 2 2 3 4 5 6 8 8
min.bending dia. 360 420 500 700 800 1100 1200 1500 1500 1600
Square Pipe bend
in ease way		 max.section 20 25 30 40 45 75 85 100 100 120
wall thickness 8 8 8 10 12 16 18 20 22 30
min.bending dia. 240 300 380 450 500 750 800 1000 1200 1400
Flate Pipe bend
in hard way		 max.section 40 50 50 60 70 100 120 150 180 200
wall thickness 8 10 14 18 18 25 30 35 35 45
min.bending dia. 200 280 300 500 650 850 900 1200 1400 1600
Angle Steel incurvature max.section 20×2.5 25×3 30×3 40×4 40×5 70×8 80×8 90×10 100×10 120×12
min.bending dia. 300 350 400 600 800 1000 1200 1500 2000 2400
min. section - - - - 20×5 30×3 35×3 36×5 38×4 40×5
min.bending dia. - - - - 800 1000 1500 1700 2100 2500
Angle Steel excurvature max.section 20×2.5 25×3 30×3 40×4 50×5 80×8 90×10 100×10 120×12 140×16
min.bending dia. 300 350 400 600 800 1000 1100 1300 1600 1800
min. section - - - - 20×5 30×3 35×3 36×5 38×4 40×5
min.bending dia. - - - - 800 1000 1500 1700 2100 2500
U steel incurvature U steel Model - - 5 6 8 12 16 20 25 28
min.bending dia. - - 500 600 700 900 1000 1200 1500 1800
U steel excurvature U steel Model - - 5 6 8 12 16 20 25 28
min.bending dia. - - 500 600 700 900 1000 1200 1500 1800
 
Technical Specification of TNC Rolling Machine (2):
Model KM-JW168 KM-JW180 KM-JW219 KM-JW245 KM-JW280 KM-JW325 KM-JW350 KM-JW400 KM-JW450 KM-JW500
Max. Section Modulus of elasticity (cm³) 158 205 356 450 562 980 1156 1807 2662 3749
Rolling Speed (m/min) 5
Bend limit(MPa) δs=250
Round Pipe Max. OD 168 180 219 245 273 323 350 400 450 500
wall thickness 6 8 8 8 8 10 10 12 14 16
min.bending dia. 2000 2000 2600 3000 3500 4000 4500 4800 5400 6000
Round Bar Max. OD 95 105 120 135 145 160 180 200 220 250
min.bending dia. 1200 1300 1350 1800 2000 2000 2200 2200 2500 3000
Square Pipe max.section 120 140 160 180 200 200 250 300 350 400
wall thickness 10 10 12 12 12 14 14 14 16 18
min.bending dia. 2000 2500 3000 3500 3500 4000 4000 4000 4500 5000
Square Pipe bend
in ease way		 max.section 120 140 160 180 200 220 250 250 300 350
wall thickness 40 40 50 50 50 60 60 70 70 80
min.bending dia. 1600 1800 2000 2200 2400 2500 2500 3000 3500 4000
Flate Pipe bend
in hard way		 max.section 250 300 350 350 400 500 500 500 500 500
wall thickness 45 50 60 70 70 70 80 100 120 150
min.bending dia. 1800 2000 2200 2500 3000 3200 3500 4000 4000 4500
Angle Steel incurvature max.section 140×16 150×16 160×16 180×14 200×18 200×20 250×20 300×20 300×25 400×30
min.bending dia. 2500 2600 2600 3600 3600 4000 4000 4500 5000 5000
min. section 50×5 50×6 60×6 70×6 75×6 85×6 100×7 120×7 120×7 150×8
min.bending dia. 2800 2800 2800 4000 4000 4500 4500 5000 5000 5000
Angle Steel excurvature max.section 150×16 160×16 180×14 200×18 200×24 250×25 300×25 350×30 400×30 500×30
min.bending dia. 2000 2200 2500 3600 3600 4000 4500 4500 5000 5000
min. section 50×5 50×6 60×6 70×6 75×6 85×6 100×7 120×7 120×7 150×8
min.bending dia. 2800 2800 2800 4000 4000 4500 4500 5000 5000 5000
U steel incurvature U steel Model 28 32 36 40 45 50 50 50 50 50
min.bending dia. 2000 2500 2500 3000 3000 3500 3500 4000 4500 5000
U steel excurvature U steel Model 28 32 36 40 45 50 50 50 50 50
min.bending dia. 2000 2500 2500 3000 3000 3500 3500 4000 4500 5000
 

Lihat detail lebih lanjut tentang Innochamp Machine Tools Sdn Bhd
Innochamp Machine Tools Sdn Bhd
Innochamp Machine Tools Sdn Bhd CNC machinery tools & Machine tools accessories suppliers Johor, Malaysia ~ Innochamp Machine Tools Sdn Bhd
Hubungi Kami flagMalaysia