WEBERPRIM SUPER SEAL

Specifications

SKU: SUPER SEAL

Weight(grams): 20000

Dimension: 20 cm (Length) x 12 cm (Width) x 20 cm (Height)

• Stir weberprim super seal well, before use. This is particularly important when using weberprim super seal (matt). No further dilution is required.
• Surfaces to be treated with weberprim super seal must be dry, sound and free of contamination eg. grease, oil, dust, laitance etc.
• Apply weberprim super seal evenly with a brush or roller. Ensure that thin even coats are applied; rather than thick or lumpy coats.
• Usually weberprim super seal can be applied as a single coat treatment. However, certain materials may require two (2) coats of sealing for better result.
• Should a Second Coat is required, allow First Coat to Touch Dry usually within 2 - 4 hours (will vary dependant on weather & porosity of materials); before applying the Second Coat in similar manner.
• The Second Coat must be applied wet on wet; before First Coat dries out or fully cure.
• The level of gloss or matt-gloss achieved may vary depending on nature of materials (ie. porosity, surface texture etc.) to be treated and number of treatment coats applied.
• Preliminary testing on small trial areas is important to determine coverage and compatibility of weberprim super seal with the materials to be treated.
• Do not apply on damp or wet surfaces. Avoid application during wet weather conditions & onto materials that are extremely hot. weberprim super seal applied on damp or wet surfaces are likely to
  flake, peel or whitened in time.
• Allow to cure 24 hours (preferably longer) before subjected to light traffic.