Deskripsi
FCA3000 is a three-channel current converter with DC outputs. It converts the values measured by a Rogowski coil into true RMS value.
FCA3000 can be used with any model or size of MFC150 Rogowski coils, according to the application. The coils can be connected directly to FCA3000 without any adapter, as FCA3000 integrates the input signal, shifting it by 90°. FCA3000 has three indipendent input channels, suitable for three transducers, and four DC outputs. The first three outputs correspond to each transducer, the forth gives the sum of the three current channels.
FCA3000 enclosure is a 9 module DIN rail for fast installation. FCA3000 can be used as current measurement interface with industrial devices such as PLC, SCADA systems, protection systems, control systems, metering equipments etc.
TECHNICAL SPECIFICATIONS
Power supply
Rated voltage: 80…260 VAC (45…65 Hz)
Consumption: 3 VA max
Measuring inputs
Number: 3
Type: for Rogowski coil with signal equalization
Sensitivity: 100mV/1kA@50Hz (only if purchased without MFC150 coil)
Full scale: 3000 A
10000 A
other values on request (from 300 A to 300 kA)
Analog outputs
Number: 4
Type: 0…20 mA
4…20 mA
0…10 VDC
Response time: 150 ms (standard) – selectable by jumpers from 50 to 150 ms approx.
Typical accuracy: ± 1% reading ± 0.3% full scale
Environmental conditions
Operating temperature: from -10°C to +50°C
Storage temperature: from -25°C to +60°C
Relative humidity: 75% max without condensation
Case features
Material: plastic enclosure – noryl UL94-V0
Protection degree: IP51 (front panel); IP20 (terminals)
Terminals: conductors 2.5 mm2
Size / weight: 158x94x58 mm / 250 g approx
Standards compliance
Safety: 73/23/EEC and 93/68/EEC directives, EN61010.1 safety standard
EMC: 89/336/EEC directive and following modifications
93/31/EEC and 93/68/EEC, EN50081-2, EN50082-2, EN61326/A1
Lihat detail lebih lanjut tentang Hexo Industries (M) Sdn Bhd
Malaysia
