Deskripsi
CRC NF Contact Cleaner - 400g
I. Product Overview
CRC NF Contact Cleaner is an innovative, stable, non-flammable cleaning solvent with no flash point. Designed for high purity, it is non-conductive, non-corrosive, and leaves no residue. This cleaner is ideal for quick evaporation and won’t stain, making it perfect for use on delicate electronic components.
Key Attributes:
-
No Flash Point
-
Non-flammable
-
Rapid Evaporation
-
Residue-Free
-
Free from CFC 113 and Methyl Chloroform
II. Recommended Applications
CRC NF Contact Cleaner is highly effective for cleaning a variety of electrical and electronic parts, including:
-
Relays
-
Switches
-
Circuit Breakers
-
Alarm and Signal Systems
-
Printed Circuit Boards
-
Connectors
-
Generators
-
Laboratory and Testing Equipment
-
Motor Controls
-
Sensors
-
Flux Removal
-
Terminals, Plugs, and Jacks
III. Key Features & Advantages
-
No Flash Point: Safe to use in various environments.
-
Non-flammable: Reduces risk during application.
-
Rapid Evaporation: Cuts down on downtime with quick drying.
-
Residue-Free: Eliminates the need for rinsing or wiping, preventing harmful deposits.
-
360° Valve: Allows for even application, even when the can is upside-down.
-
CFC-Free: Environmentally safe, free from CFC 113 and Methyl Chloroform.
IV. Physical Characteristics (Without Propellant)
-
Flash Point: None
-
Boiling Point: 30°C (Initial)
-
Odor: Mild Ethereal
-
Solubility: Slightly soluble in water
-
Appearance: Colorless liquid
-
Volatility: 100%
-
Vapor Density: 4
-
Specific Gravity: 1.21 @ 20°C
-
Dielectric Strength: 40,000 Volts per ASTM D-877
-
Propellant: CO2
-
Fire Point: None
V. Performance Data
-
ASTM D-1133 (Kauri-Butanol Value): 51
-
ASTM D-877 (Dielectric Strength): 42,000 Volts
-
Surface Tension: 18.5 Dynes/cm
-
Evaporation Rate: Very Fast
-
Residue: None
VI. Usage Instructions
-
Preparation: Thoroughly read the entire label before use. Ensure all equipment is deactivated before application.
-
Application: Spray generously on the area to be cleaned and allow it to drain. Use the extension tube for hard-to-reach spots.
-
Caution: Be cautious when using on sensitive plastics such as acrylic, ABS, Pebax 2533, and polystyrene. Test on a small area first.
-
After Use: Ventilate the area well before reactivating equipment.
-
For Lubricated Contacts: After cleaning, apply CRC 2.26 to restore lubrication.
VII. Disposal Guidelines
Disposal methods depend on local regulations. Always dispose of used and unused products according to local, state, and federal laws.
VIII. Safety Warnings
Aerosol Cans:
-
Do not puncture, incinerate, or store above 50°C.
-
Keep away from heat sources and direct sunlight.
-
Caution: Aerosol cans conduct electricity, so keep away from live electrical sources to avoid the risk of flash fire or electric shock.
General Safety:
-
Use only in well-ventilated areas.
-
Avoid breathing in vapors and avoid contact with skin or eyes.
-
If ventilation is poor, use appropriate respiratory protection.
The cleaner is non-conductive, non-corrosive, and free from harmful CFCs. With its no-flash-point formula and 360° valve, it delivers safe, effective cleaning, even in hard-to-reach places. Secure your supply from Malaysia's Authorized Distributor by Walk-In Purchase Nearby or Indoor Sales Support by email, whatsapp or call.
Contact our sales consultant in area:
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei
Lihat detail lebih lanjut tentang Davor Sdn Bhd
Malaysia
