Solar Hot Water Solarmate Classic 300L

Solarmate solar hot water systems require minimal maintenance, can be as infrequent as every 3–5 years.

In Malaysia, Solarmate also provides maintenance checkups with minimal fee. These can be beneficial in extending the lifespan and ensuring optimum performance.

PRODUCT SPECIFICATION
Storage Capacity : 300 Litres
Tank Dimension : 2000 x 1000 x 80 mm
Weight (dry) : 199 kg
Weight (operating) : 460 kg
Outer Casing Material : 0.7 mm Aluminium / 0.45 mm
Zincalume Base Plate Material : 0.5 mm
Aluminium Tank Insulation : High Density Cosmonate Foam (CFC Free)
End Cover Material : Polyethylene UV
Protected Cylinder Material : 1.2 mm AISI Stainless Steel
Working Pressure : 400 kPa
Test Pressure : 1050 kPa
Laminar Flow Stratify : Stainless Steel

Tank Capacity : 300 Litres
Overall Dimension ( W x L x H ) : 2000mm x 1000mm x 80mm
Overall Weight ( Empty / Full ) : 199Kg / 460Kg 
System : Pressurized System 

Solar Mate water heater is committed to providing customers with complete peace with
• The most extensive experience in Malaysia which has more than 40 years history
• Continuously positive and excellent customer reviews
• Reliable customer support team, ongoing R&D
• Professional installers and maintenance personnel.

FREQUENT ASK QUESTION (FAQ)
1. Which Model to choose?
SM180-C (180L) : Suitable for 1-4 people, with max. of 3 bathrooms
SM300-C (300L) : Suitable for 1-7 people, with max. of 5 bathrooms
**The calculation is based on a 6" shower head and 10 minutes shower for each person.
**Above for guidelines only, result may vary base on other factors. Eg: House condition, bathing time, weather, water pressure, sizes of shower head, bathtub/jacuzzi.


2. Where to allocate the solar heater?
Highest of the building where the roof area can fit the Solar Heater with the preferred direction accordingly of South - North - East - West. Recommend to install nearby the cold water tank as cold water supply to the solar is from the cold water tank and place with stronger roof trusses.

3. What things to prepare before installation?
~Hot and cold water piping system. 0.5 inches (½”) Stop-cock have to be standby at below/nearby the Solar Water heater, either inside or outside ceiling.
~15 Amp Power Point required to be ready nearby the solar water heater.


4. What's the basic installation included?
- Ten (10) feet of hot and cold water piping for solar system inlet and outlet.
- 3kW Backup heating and thermostat set
- Pressure temperature valve (PT valve) to control the pressure

5. What are the things excluded in the basic installation?
Aluminum rack for flat roof installation, Crane charges, Water Pump, Mixer Taps, Extra hot/cold water pipes which more than 10ft, plug point for back up heater.

6. Will I get hot water on rainy days or nights?
A short period of rainfall will not affect the supply of hot water because solar tanks are insulated. With average of 3 hours sunlight daily, it heats water to 80oC in the day and loses about 8% only at night time. But, raining season it might require to switch on the backup heater