Micrometer- MHGS type（standard type）is used widely and frequently.
Measurement range-0-50mm
Accuracy-0.005mm
★ Front tip – Flate. Shaft diameter is used by allowable tolerance h6.；Round. As transferring device, sphere type could decrease errors caused by slanting of mounting portion of micrometer to minimum.
★ Installation way – Lock screw, it is simply and firmly locked.；Set screw, locked and welded process. Attached screw type, recommended thickness 6mm
★ Scale par finish：Hard chrome-plating
★ Gauging plate：SKS3（Hardness：above HRC60）
|
Model No. |
Measurement Range (mm) |
|
MHGS-FN-6.5 |
0 ~ 6.5 |
|
MHGS-FP-6.5 |
0 ~ 6.5 |
|
MHGS-SN-6.5 |
0 ~ 6.5 |
|
MHGS-SP-6.5 |
0 ~ 6.5 |
|
MHGS-FN-13 |
0 ~ 13 |
|
MHGS-FP-13 |
0 ~ 13 |
|
MHGS-SN-13 |
0 ~ 13 |
|
MHGS-SP-13 |
0 ~ 13 |
|
MHGS-FN-15 |
0 ~ 15 |
|
MHGS-FP-15 |
0 ~ 15 |
|
MHGS-SN-15 |
0 ~ 15 |
|
MHGS-SP-15 |
0 ~ 15 |
|
MHGS-FN-25 |
0 ~ 25 |
|
MHGS-FP-25 |
0 ~ 25 |
|
MHGS-SN-25 |
0 ~ 25 |
|
MHGS-SP-25 |
0 ~ 25 |
|
MHGS-FN-50 |
0 ~ 50 |
|
MHGS-FP-50 |
0 ~ 50 |
|
MHGS-SN-50 |
0 ~ 50 |
|
MHGS-SP-50 |
0 ~ 50 |
| Purpose |  The micrometer type is particularly for high accuracy positioning devices, such as optical instruments, precisely fine tuning stages, various machine tools, gauging instruments, precisely positioning devices, fixed amount transmissions, etc. |
| Micrometer Selection | The considerations of selecting a micrometer might be including gauging range, the shape of gauging face, shaft, and the size of reading axis. Selections should be based on purposes. |
| Gauging Plane Selection |
The shaft is designed with the most suitable dimension for the body using an allowable tolerance h6. Once the instrument be used for gauging purposes, it is generally suggested to use the plate type; for transferring purposes, using the sphere type could minimize the errors. |
| Installation |
|
|
| Feed Position |
|
|
| Characterisitc of Different Guiding Type |
|
|
| The Main Feeding Mode of Mini Stages |
|
|
Lihat detail lebih lanjut tentang iMS Motionet Sdn Bhd
Malaysia
