High Pressure Fuel Filters Water Separator

110A Series

Diesel/Gasoline High Pressure Cartridge Fuel Filter/Water Separator

The 110A fuel filter/water separator may be installed on the vacuum or pressure side of a fuel pump (up to 100 psi /6.9 bar) with a maximum flow rate of 15 gph (57 lph) for diesel fuel and 35 gph (132 lpm) for gasoline. The compact size and four port versatility make the 110A a popular fuel filter/ water separator for small engine applications.  The filter features 1/4˝- 18 NPTF (SAE J467) inlet and outlet fuel ports and a unitized mounting bracket.  Its two piece, powder-coated die-cast aluminum construction ensures a long-lasting, durable particulate and water removing filter.  Servicing is also made easier by the spin-on bowl assembly and simple cartridge filter changeout procedure.

The 110A Series is a two piece all aluminum design with a cartridge type filter element.  Servicing is accomplished by spinning off the bottom bowl from the mounting head.  Collected water is drained from a ½”-20 UNF bolt.  Inlet and outlet ports are available on either side of the unit.  Fuel enters the inlet and travels inside-out through the cartridge filter assembly.  Any collected water falls down through the center of the element while fuel exits through the filter to the outlet.

Product Features:

• 100 psi /6.9 bar operating pressure or can be used on vacuum side of pumps.
• 4 port (1/4˝- 18 NPTF (SAE J467)), die-cast aluminum unitized head
• Mounting holds spaced at 1.4" (35.6 mm), for 1/4" bolt
• 2 piece powder-coated aluminum construction
• Filters gasoline, diesel, and gasoline/oil blended fuels
• Flow rates up to 35 gph (132 lph) with gasoline applications
• Flow rates up 15 gph (57 lph) for diesel fuel application
• Certifications: ABYC, NMMA type accepted, UL listed
• Compact design
• Heavy duty construction
• Easy to service