Shadow digital electronic boost controller can set two sets of boost modes with different values and a set of original factory modes. By quickly switching these three modes to adjust turbocharging, it effectively improves engine performance and increases horsepower. The built-in forced pressure relief mechanism and the display interface provide the functions of monitoring and protecting the turbine, which is the most suitable modification for the turbo vehicle.
Shadow digital electronic boost controller uses a high-frequency solenoid valve to precisely control the combustion gas flow in the engine. By increasing the pressure to increase the air intake, the vehicle dynamics will also respond positively, effectively increasing engine performance. The vehicle can easily obtain power by this fine tuning controller. Compared with the previous manual adjustment of the engine, the owner of the turbo vehicle can more conveniently perform the turbo adjustment.
FEATURES
- Support Actuator and Wastegate mainstream turbocharging systems.
- Ultra-high frequency solenoid valve, precise control of air pressure relief.
- The right-hand drive operation interface can be switched.
- OLED display screen enhances visual effects.
- Combine with turbo gauge to monitor and adjust turbocharging at any time.
FUNCTION
- The air-fuel ratio meter can be expanded to detect and set the lean combustion pressure relief mechanism.
- Adjust the Duty value to increase the maximum instantaneous pressure, breaking the original factory booster limit.
- Adjust the Gain value and pull up the pressure-holding curve, to increase the turbo beneficial time.
- Pressure forced to relief mechanism to ensure the safety of turbo and engine.
- There are three display modes--waveform, light bar and number, which can visually display the value of the supercharger.
- You can set two sets of boost modes with different values and one set of original factory modes.
SPECIFICATION
Display Size 2.6 inch
Display Cable 100cm
Solenoid Cable 200cm
Sensor Cable 220cm
Silicone Tube Inner Diameter 4mm
Silicone Tube Outer Diameter 8mm / 50cm
O2 Sensor Cable 10cm
