Overview
The V6S 6-kg payload welding robot provides an outside-the-arm wire feed system to avoid bending soft welding wires like aluminum during extreme tightly contorted movements. The additional payload compared to the B4S and B4LS allow for
Arc Welding Robot
| Specification | Value |
|---|---|
| Number of Axes | 7 |
| Maximum Payload Capacity | 6 kg |
| Positional Repeatability | +/- 0.08 mm (Note 1) |
| Horizontal Reach | 1427mm |
| Vertical Reach | 2424mm |
| Drive Capacity | 3600W |
| Working Range, Arm, J1 (Rotation) | +/- 170° |
| Working Range, Arm, J2 (Lower Arm) | -145°~ +70° |
| Working Range, Arm, J3 (Upper Arm) | -170°~ +149° |
| Working Range, Wrist, J4 (Swing) | +/- 180° |
| Working Range, Wrist, J5 (Bending) | -50°~ +230° (Note 2) |
| Working Range, Wrist, J6 (Twist) | +/- 360° (Note 2) |
| Maximum Velocity, Arm, J1 (Rotation) | 3.66 rad/s {210°/s} |
| Maximum Velocity, Arm, J2 (Lower Arm) | 3.66 rad/s {210°/s} |
| Maximum Velocity, Arm, J3 (Upper Arm) | 3.66 rad/s {210°/s} |
| Maximum Velocity, Wrist, J4 (Swing) | 7.33 rad/s {420°/s} |
| Maximum Velocity, Wrist, J5 (Bending) | 7.33 rad/s {420°/s} |
| Maximum Velocity, Wrist, J6 (Twist) | 10.82 rad/s {620°/s} |
| Wrist Load, Allowable Moment, J4 (Swing) | 11.8 N*m |
| Wrist Load, Allowable Moment, J5 (Bending) | 9.8 N*m |
| Wrist Load, Allowable Moment, J6 (Twist) | 5.9 N*m |
| Wrist Load, Allowable Moment of Inertia, J4 (Swing) | 0.30 kg*m^2 |
| Wrist Load, Allowable Moment of Inertia, J5 (Bending) | 0.25 kg *m^2 |
| Wrist Load, Allowable Moment of Inertia, J6 (Twist) | 0.06 kg *m^2 |
| Arm operation cross-sectional area | 2.58 m^2 x 340° |
| Environmental Conditions | 0 ~ 45°C, 20 ~ 80 %RH (No condensation) |
| Mass | 178 kg |
| Upper arm payload capacity | 10 kg (Note 3) |
| Installation type | Floor type |
| Paint color | White (Munsell 10GY9/1) |
Malaysia
