High Functionality Model Digital Force Gauge
High functionality type digital force gauge has capacity of 1000N and is equipped with additional functions to ZTS series, such as input/output of displacement and data saving to USB. Next series digital force gauges with firmware Ver.5 or later offers improved measurement stability with less noise, and optional functions and software can be downloaded from the dedicated website (IMADA-connected.com). Some functions require connection to separately-sold products.
The display shows force value, unit and peak. Can be configured with additional user-selectable data include memory data, -NG count, high/low set point, 1st and 2nd peaks, displacement value and etc.
Included with device driver and ZT logger data acquisition software. The ZT Logger can download data from gauge memory or capture continuous stream data at 10 dtat/second. Zero the gauge or capture data while at computer.
Model | ZTA |
Feature | Advanced model with various functions such as data saving in USB memory stick, displacement I/O and more. |
Accuracy | +/-0.2%F.S.+/-1digit |
Unit of measurement(*1) | N, kgf, lbf (*2) |
Display | 4-digit Organic EL |
Display update | 16 / sec |
Sampling rate | 2000 data / sec at maximum (*3) |
Battery | 8 hours (2 hours charge) (*4) |
Safe overload rating | Approx.200%F.S. |
Operating environment | Temperature: 0 to +40 degree Celsius, Humidity: 20 to 80%RH |
Function | Customized display (header and footer), Peak hold (tension and compression), Internal 1000 points data memory, Comparator (judgment of OK or NG), Reversible display, Sign inversion, Zero clear timer, +NG alarm, Off timer (auto power off), Dumping, Time display, 1st/2nd peak, Displacement detection at force peak value, Displacement zero reset at selected force, setting lock |
Output | USB, RS232C, Mitutoyo digimatic (*5), 2 VDC analog output (D/A), Comparator 3 steps (-NG/OK/+NG), Overload alarm, Sub comparator 2 steps (output of large or small judgment), USB flash drive, Displacement. |
Overload warning | Approx.110%F.S. (Warning message and alarm ) |
External connecting switch | SEND (a point of contact holding), Zero reset, Peak ON/OFF setting |
Available linear scales (*6) | – Online driver output (a line receiver according to RS422/485 must be built in.) – Open collector output (Voltage drop between contacts must be smaller than 0.5V.) |
Weight | From 2N to 1000N model: Approx.490g (*7) 2500N, 5000N: Approx.1100g (*7) |
Dimensions | Please refer to dimensions. |
Accessory | AC adapter, Inspection certificate, CD driver (including simple software for data logging), Attachments (The set of attachments varies according to range.), USB cable, Carrying case, Adaptor for USB flash drive. (*8) |
*1 These are the specifications for International model. Please note that this unit is different from Japanese domestic model and international one.
*2 [N indication] The indication of 2N and 5N models is mN or N. The indication of 1000N,2500N and 5000N model is N or kN.
[kgf indication] The indication of 2N and 5N models is gf.
[lbf indication] The indication of 2N and 5N models is ozf.
*3 Up to 100 data/sec. is saved in USB memory (selectable among 1, 50, and 100 /sec)
*4 The battery is more consumed when connected to USB flash drive or a linear scale.
*5 Not always available for Mitutoyo digimatic products.
*6 Some linear scales could not be available even if they meet the mentioned specifications.
*7 Weight is slightly different according to range.
*8 USB flash drive is not included.
Model | Capacity | Display | Resolution | Thread | Included Nut | |
Japan Model | US Model | |||||
ZTA-2N | ZTA-0.4 | 2N | 2.000N (2000mN) | 0.001N (1mN) | M6 P1.0 (Coarse thread) Thread length: 11.6mm |
Hexagon nut Material:Resin Height:5mm |
ZTA-5N | ZTA-1 | 5N | 5.000N (5000mN) | 0.001N (1mN) | ||
ZTA-20N | ZTA-4 | 20N | 20.00N | 0.01N | ||
ZTA-50N | ZTA-11 | 50N | 50.00N | 0.01N | ||
ZTA-100N | N/A | 100N | 100.0N | 0.1N | ||
ZTA-200N | ZTA-44 | 200N | 200.0N | 0.1N | ||
ZTA-500N | ZTA-110 | 500N | 500.0N | 0.1N | ||
ZTA-1000N | ZTA-220 | 1000N | 1000N (1.000kN) | 1N (0.001kN) | ||
ZTA-2500N | ZTA-550 | 2500N | 2500N (2.500kN) | 1N (0.001kN) | M10 P1.5 (Coarse thread) Thread length: 15mm |
Hexagon nut Material:Steel Height:6mm |
ZTA-5000N | ZTA-1100 | 5000N | 5000N (5.000kN) | 1N (0.001kN) |
ZTS Series
Digital force gauge ZTS series is functional yet user-friendly model with 2N to 1000N capacity to perform the push pull gauge testing presented by MSP Metrology Sdn Bhd from Imada Japan
Standard Model Digital Force Gauge
Standard type digital force gauge has capacity of 1000N and is easy-to-operate and functional, with 2000Hz high-speed sampling for accurate peak measurement and smooth curve when graphing data. The included software enables data management via PC, and graphing software for detailed data analysis. Several external output methods are available for connection to various devices. Next Series digital force gauges with firmware Ver.5 or later has improved measurement stability with less noise, and optional functions and software can be downloaded from the dedicated website (IMADA-connected.com). Some functions require connection to separately-sold products.
The display shows force value, unit and peak. Can be configured with additional user-selectable data include memory data, -NG count, high/low set point, 1st and 2nd peaks, displacement value and etc.
Included with device driver and ZT logger data acquisition software. The ZT Logger can download data from gauge memory or capture continuous stream data at 10 dtat/second. Zero the gauge or capture data while at computer.
Model | ZTS |
Feature | Standard model with high functionality and usability. |
Accuracy | +/-0.2%F.S.+/-1digit |
Unit of measurement(*1) | N, kgf, lbf (*2) |
Display | 4-digit Organic EL |
Display update | 16 / sec |
Sampling rate | 2000 data / sec at maximum |
Battery | 8 hours (2 hours charge) |
Safe overload rating | Approx.200%F.S. |
Operating environment | Temperature: 0 to +40 degree Celsius, Humidity: 20 to 80%RH |
Function | Customized display (header and footer), Peak hold (tension and compression), Internal 1000 points data memory, Comparator (judgment of OK or NG), Reversible display, Sign inversion, Zero clear timer, +NG alarm, Off timer (auto power off), Dumping, Time display, Setting lock |
Output Overload warning | USB, RS232C, Mitutoyo digimatic (*3), 2 VDC analog output (D/A), Comparator 3 steps (-NG/OK/+NG), Overload alarm Approx.110%F.S. (Warning message and alarm ) |
External connecting switch | SEND (a point of contact holding), Zero reset, Peak ON/OFF setting |
Weight | From 2N to 1000N model: Approx.490g (*4) 2500N, 5000N: Approx.1100g (*4) |
Dimensions | Please refer to dimensions. |
Accessory | AC adapter, Inspection certificate, CD driver (including simple software for data logging), Attachments (The set of attachments varies according to range.), USB cable, Carrying case |
*1 These are the specifications for International model. Please note that this unit is different from Japanese domestic model and international one.
*2 [N indication] The indication of 2N and 5N models is mN or N. The indication of 1000N,2500N and 5000N model is N or kN.
[kgf indication] The indication of 2N and 5N models is gf.
[lbf indication] The indication of 2N and 5N models is ozf.
*3 Not always available for Mitutoyo digimatic products.
*4 Weight is slightly different according to range.
Model | Capacity | Display | Resolution | Thread | Attachment Nut | |
Japan Model | US Model | |||||
ZTS-2N | ZTS-0.4 | 2N | 2.000N (2000mN) | 0.001N (1mN) | M6 P1.0 (Coarse thread) Thread length: 11.6mm |
Hexagon nut Material: Resin Height: 5mm |
ZTS-5N | ZTS-1 | 5N | 5.000N (5000mN) | 0.001N (1mN) | ||
ZTS-20N | ZTS-4 | 20N | 20.00N | 0.01N | ||
ZTS-50N | ZTS-11 | 50N | 50.00N | 0.01N | ||
ZTS-100N | N/A | 100N | 100.0N | 0.1N | ||
ZTS-200N | ZTS-44 | 200N | 200.0N | 0.1N | ||
ZTS-500N | ZTS-110 | 500N | 500.0N | 0.1N | ||
ZTS-1000N | ZTS-220 | 1000N | 1000N (1.000kN) | 1N (0.001kN) | ||
ZTS-2500N | ZTS-550 | 2500N | 2500N (2.500kN) | 1N (0.001kN) | M10 P1.5 (Coarse thread) Thread length: 15mm |
Hexagon nut Material: Steel Height: 6mm |
ZTS-5000N | ZTS-1100 | 5000N | 5000N (5.000kN) | 1N (0.001kN) |
More detail about MSP Metrology (M) Sdn Bhd