ASTM B117/D380, JIS 5400/L22371, CNS 886/4157/4158/4159/5078
Salt spray tester is used for testing rust-proof treatment of material, such as metal surface that after painting, coating, electroplating, anodizing, films of organic and non-organic…etc. It’s a corrosion and Rust-Resistant test.
A tester for testing the grade of rust resistance of the material surface treatment of electro-plating, paint coating, anodizing. To set up the constant temperature in un-metal chamber, and then spray salt water with dropped fog 1mm~2mm/min. on specimen. Set the specimen obliquely on holder to make sure be sprayed completely. Take out the specimen after a period and determine the grade by its corrosion condition.
| Specs | Description |
|---|---|
| Internal Dim. W x H x D (cm) | 60 x 40 x 45(M); 90 x 50 x 60(L) |
| External Dim. W x H x D (cm) | 125 x 110x94(M), 155 x 126 x 105(L) |
| Quantity of collecting cup | 1pc(M); 2pc(L) |
| Power of Heater(Watt) | 1000W(M);2000W(L) |
| Air temperature range | Room temp. ~ 47℃; ± 0.5℃ |
| Saturated air Pressure (Kg/cm2) | 0.8 ~ 2.0 ± 0.1 |
| Spray volume (ml/80 cm2 /hr) | 0.5 ~ 3.0 |
| Salt Spray Test(PH) | 6.5 ~ 7.2 |
| CASS Test(PH) | 3.0 ~ 3.2 |
| Exterior material | PVC or PP |
| Interior material | P.V.C. or P.P |
| Heater | Titanium Heater |
| Control system | Digital electronic control |
| Salt Spray Test(PH) | 6.5 ~ 7.2 |
| CASS Test(PH) | 3.0 ~ 3.2 |
| Exterior material | PVC or PP |
| Power source | AC 1∮, 220v ±10%, 50/60HZ |
| Interior material | P.V.C. or P.P |
| Chamber temperature range | Room Temp. 35℃ |
| Heater | Titanium Heater |
| Control system | Digital electronic control |
| Saturated air Pressure (Kg/cm2) | 0.8 ~ 2.0 ± 0.1 |
| Spray volume (ml/80 cm2 /hr) | 0.5 ~ 3.0 |
| Chamber temperature range | Room Temp. 35℃ |
| Power source | AC 1∮, 220v ±10%, 50/60HZ |
Malaysia
