BACHARACH MGS-250 Gas Detector: Top Choice in Selangor, Malaysia, Kuala Lumpur (KL), Shah Alam Precizion Tools

Description

Infrared Refrigerant Gas Detector

Long-life, proprietary infrared (NDIR) sensor
Detects CFCs, HFCs, HCFCs and new HFO refrigerants
No cross interference to other gases, humidity or temperature
Modbus RTU interface, analog output, BAS/BMS system connectivity
Set all parameters and outputs without opening the unit

Description

Bacharach's MGS-250 Infrared Refrigerant Gas Detector is the leader in performance and flexibility. It can be configured as either a broadband sensor used for gross leak detection, or as a gas-specific version that’s pre-calibrated and characterized for precision response to individual refrigerants. The MGS-250 is the economical solution for detecting refrigerants without the limitations posed by solid-state sensor technologies.

Advanced infrared sensing technology makes the MGS-250 immune to cross sensitivities from combustible and toxic gases, as well as changes in temperature and humidity. The infrared sensor provides low-level leak detection and delivers up to 5 to 7 years of virtually maintenance-free operation. The MGS-250 has an alpha-numeric LED display, status indicator, on-board relay, and alarm to alert personnel when levels have exceeded the preset limit.

Specifications

`Type`	`Leak detector using IR sensors`
`Gases`	`Refrigerants – CFCs, HCFCs, HFCs, HFOs`
`Measuring Range`	`0 to 3,500 ppm`
`Display`	`4-digit, 7-segment red LED and green status LED`
`Output`	`Analog`	`4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V`
	`Digital`	`Modbus RTU via RS 485`
`Power Supply`	`24 VDC or 24 VAC; 3- or 4-wire`
`Relay`	`1 alarm relay, SPDT`
	`Rating 1 A @ 24 VDC, 0.25 A @ 240 VAC, resistive load`
	`Alarm delay 0 to 15 minutes; user-programmable`
`Ambient Conditions`	`Temperature`	`- 22 to +104 °F (- 30 to +40 °C)`
	`Humidity`	`5 to 90 %RH, non condensing`
	`Altitude`	`0 to 10,000 ft (3,050 m)`
`Enclosure`	`ABS; snap-in cable gland for 0.115 to 0.25” cable`
`Size (w x h x d)`	`Approx. 4.0” x 5.5” x 1.5” (100 x 140 x 40 mm)`
`Weight`	`Approx. 6.3 oz (180 g)`
`Approvals`	`CE, UL, CSA, IEC, EN 61010-1`

More detail about Precizion Tools