No Bottom Bucket

No Bottom Bucket

Category: Plastic Elevator Bucket Available
For more information, visit our official website at eai.com.my

Description

Material : HDPE/NYLON/UHMWPE                                
Features :                                
• Bottomless elevator Buckets for agricultural use.                                 
• An assembly of several bottomless elevator buckets and one bucket with bottom is installed at a close spacing on the belt. This will allow materials to be conveyed continuously allowing larger capacity.                                
 Capacity will increase 1.5~2 times by using bottomless elevator buckets. Bottomless elevator buckets can be used at higher discharge speed.                                
• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.                                
• Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc                                
Using Recommendations:                                
• Minimum bucket spacing: Buckets spacing in one group= “C” +1mm; Bucket spacing between the groups= Bucket Projection“B” Bucket Depth “C” +25mm.                                 
• For engineering purposes, we recommend using “L” for usable capacity.                                  
• Mounting holes can be customized on request.                                
                                
Technical Specifications :

Model Bucket Dimension* (mm) Mounting Holes (mm) Capacity (L)
Length A Proj. B Depth C Distance Down D PCD E Standard Punching Holes Hole Diameter
BB0706 72 62 30 14 30 2 6.5 0.08
BB1109 110 92 50 20 60 2 6.5 0.21
BB1109A 110 92 45 22 60 2 6.5 0.25
BB0907 90 78 33 15 40 2 6.5 0.18
BB1310 130 102 45 20 70 2 6.5 0.36
BB1311 130 110 45 18 70 2 6.5 0.36
BB1812 186 125 60 25 90 2 8.5 0.85

• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.                    
• Less weight, prolong service life of buckets and belts, reduce elevator consumption.                     
• A direct replacement for many other international brands.                     
• Unique elevator bucket design with multiple patents.                     
• Our elevator buckets are well regarded, worldwide for high cost /quality ratio.

Material HDPE Nylon 6 UHMWPE PU Mild Steel Stainless
Cost 1 3 3 4 2 4
Wear Resistance 1 2 3 4 3 4
Impact Resistance 1 2 2 2 2 2
FDA Food Approved Yes Yes Yes No No No
Max Temp℃ Continuous 70 100 70 60 180+ 250+
Max Temp℃ Peak 80 120 80 70 220 400

Remark : Code 1 = low  4 = high                                
                                
• HDPE : Tough and lexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than1g/cm³ .   
• Nylon : High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.                                
• UHMWPE : Extremely abrasion resistance, corrosion resistant, impact absorbing properties, low temperature resistant, sanitary (FDA approved), Non-caking and sticking, now water absorption, light weight properties.Higher cost performance products.                                
• PU : Extremely abrasion resistance, tough and lexible, and are suitable for handling sharp, cutting and sticky products.                                
• Mild Steel : General purpose, long life, well suited to agricultural and industrial products.                                
• Stainless Steel : Food grade, corrosive resistance, suitable for food and high temperature applications.   

More detail about EAI Marketing Sdn Bhd
EAI Marketing Sdn Bhd
EAI Marketing Sdn Bhd Conveyor Belt Supplier Johor Bahru (JB), Caterpillar Belt Supply Malaysia, Rubber Sheet Supplies Johor Jaya ~ EAI Marketing Sdn Bhd
Contact Us flagMalaysia