Description
ATF FLUSH
Product Description
Spanjaard ATF Flush is formulated with a special blend of additives to clean and prepare automatic transmissions for new fluid.
Application
- Compatible with all automatic transmission fluids (ATF).
- Removes sludge and varnish deposits.
- Ensures optimum performance of the new fluid.
- Safe on all seals and contains no harmful solvents.
Note: Only for use in Automatic Transmissions.
Not suitable for use with continuously variable transmissions (CVT) or dual clutch transmissions (DCT).
Application Instructon
1) Drain 250ml of the old fluid.
2) Add full contents of the ATF Flush tin (250ml) directly to transmission.
3) Drive vehicle at low speed for 30 minutes to fully circulate the flush fluid.
4) Drain transmission completely and refill with ATF according to vehicle manufacturer’s specifications.
For best results it is recommended that the automatic transmission filter is also replaced after flushing.
Typical Properties
|
Colour |
Clear yellow liquid |
|
Density, (25°C), g/ml |
0.87 |
|
Viscosity (40°C), cSt |
8-10 |
Packaging
250 ml aerosol can
Contact our sales consultant in area:
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei
More detail about Davor Sdn Bhd
Malaysia
