About STARVISION FS SERIES
| ITEM | Unit | FS-2216/20 | FS-2716/20 | FS-3216/20 | FS-4216/20 | ||
| TRAVEL | X Axis | mm | 2.200 | 2.700 | 3.200 | 4.200 | |
| Y Axis | mm | 1,600 / 2,000 | |||||
| Z Axis | mm | 800(1,000-opt.) | |||||
| Distance From Spindle Nose To Table | mm | 150-950(150-1,150-opt.) | |||||
| Distance Between Two Column | mm | 1,700 / 2,100 | |||||
| WORKING TABLE | Table Length | mm | 2.000 | 2.500 | 3.000 | 4.000 | |
| Table Width | mm | 1,400 / 1,700 | |||||
| Table Load | kg | 8.000 | 9.000 | 10.000 | 12.000 | ||
| T- Slot (Width x Number x Pitch) | mm | 22x7x180 / 22x9x180 | |||||
| SPINDLE | Spindle Taper | - | BT-50 / ISO-50 / CAT-50 | ||||
| Spindle Speed | rpm | 4,500(6,000-opt.) | |||||
| Spindle Motor (Cont./30 Minutes Rated) | kw | 18.5 / 22 (22/26-opt.) | |||||
| FEED | Rapid Traverse(X/Y/Z) | m/min | 12 / 12 / 15 | 10 / 12 / 15 | |||
| Cutting Feedrate | mm/min | 7.000 | |||||
| ACCURACY | Positioning Accuracy | mm | ±0.005 / 300 ; ±0.015 / Full travel | ||||
| mm | P0.03 | P0.035 | |||||
| Repeatability | mm | ±0.003 | |||||
| mm | 0,025 | 0,028 | |||||
| ATC | Tool Magazine Capacity | pcs | 32 (24/40/60-opt.) | ||||
| Max. Tool Size (Full Pocket/Next Pockets Empty) | mm | Ø125/245 | |||||
| Max. Tool Length | mm | 350 | |||||
| Max. Tool Weight | kg | 20 | |||||
| OTHER | Power Required | kva | 65 | ||||
| Pneumatic Input Pressure | kg/cm2 | 65 | |||||
| Machine Net Weight | tons | 20 / 22 | 22 / 24 | 24 / 26 | 28 / 30 | ||
| Floor Space (LxWxH) | m | 8.2x5.1(5.5)x4.7 | 9.2x5.1(5.5)x4.7 | 10.2x5.1(5.5)x4.7 | 12.2x5.1(5.5)x4.7 | ||
| •Specification is subject to change without further notice. | |||||||
Malaysia
