AXIS™ Quiet Series Fan-Powered Terminal 45K Up to 3,000 Cfm (Primary & Fan Airflow)

The 45K fan-powered units provide a combination of primary air cooling or plenum induction and reheat to meet most application needs at the lowest possible sound levels.

---

• Fan airflow capacities from 50 to 3000 CFM
• Primary airflow capacities from 52 to 3000 CFM
• Ultra quiet operation for critical sound applications
• Round inlet sizes from 6 in. through 16 in. diameter
• 20 gage, galvanized steel casing construction
• Integral induced air sound attenuator
• Suitable for low, medium, or high pressure applications
• Linear, multiple-point, averaging velocity sensor with an amplified signal
• Damper blade has a flexible gasket for tight airflow shutoff
• Damper blade operates over a full 90 degrees
• All damper assemblies utilize a solid ½ in. shaft that rotates in self-lubricating Delrin® bearings
• Pressure independent controls, including Carrier i-Vu Open (BACnet), Carrier Comfort Network® (CCN), analog, or pneumatic controls
• Electric or hot water reheat coils
• Multiple casing liners available
• Electric heat (1 to 3 stages) or proportional (SSR) heat
• Standard unit casing lined with ½ in. thick, 1-1/2 lb dual density fiberglass insulation that meets UL 181 and NFPA 90A
• Certified performance in accordance with ARI Standard 880

• 20 gage, galvanized steel heaters are ETL listed in accordance with UL standards
• Heaters equipped with:
• Primary automatic and secondary manual reset thermal cutout
• Deenergizing magnetic contactors
• Airflow proving switch
• 80/20 Ni-Cr elements
• Strong integral panel/post construction for product durability

• NEMA 2 steel control enclosure for electric or electronic components
• Removable bottom access panel for easy accessibility during routine inspections and maintenance
• Label information adhered to each unit includes model, size, airflow (cfm), balancing chart, and tagging data

• Rectangular discharge with slip and drive connections provides quick and easy connection to downstream ductwork
• Compact unit casing accommodates installation in reduced ceiling plenum space
• Factory-installed controls
• All round collars accommodate standard spiral and flex duct sizes
• Balancing taps provided for easy airflow verification
• Single point electrical connection