Description
Spanjaard Anti Rust Spray
Product Description
A multi-purpose light coloured, non-conductive low viscosity product for use as a water displacing, penetrating, lubricating, cleaning and corrosion preventive fluid. Available in Standard and Non-flammable (NF) versions in aerosol and bulk form.
Application
Displaces moisture, penetrates, lubricates, cleans and protects against corrosion.
- Water Displacement:
Strongly repels moisture and dries electrical equipment immediately by simply dipping or spraying e.g. electric motors, switches, circuit boards, car distributors, high tension leads, cables, communication equipment, sporting arms etc in industry, marine and home applications. Spanjaard Spark is a non-conductor and may be sprayed directly onto electric circuits, to lubricate, clean and prevent oxidation of contacts and increase their efficiency. In vehicles, which do not start due to water ingress, the entire ignition system is simply sprayed with Spanjaard Spark. This also improves the output of the whole electrical system and prevents power leakages. Spanjaard Spark, when applied to emergency equipment, which is infrequently used, ensures prompt starting when required, without the need for special storage.
- Penetrant:
Penetrates the most inaccessible places and frees rusted components e.g. nuts and bolts, hinges etc.
- Lubricant, Cleaner & Protector against Corrosion:
The thin protective film which is compatible with oils and greases will not interfere with fine tolerances. Lubricates, cleans and protects against corrosion.
Typical Properties
|
TYPICAL PROPERTIES |
SPANJAARD SPARK |
|
Colour |
Light brown |
|
Density, g/ml – Std grade |
0.83 |
|
– NF grade |
1.35 |
|
Viscosity at 40°C |
5.0 |
|
Flash point, °C – Std grade |
67 |
|
– NF grade |
None |
|
Breakdown voltage, IEC156,kV |
38 |
|
Humidity cabinet, 1000hr |
Pass |
|
Salt fog corrosion – STD grade, 50hrs |
Pass |
|
– NF grade, 1000hrs |
Pass |
Application Instruction
- As an aerosol spray or by using spraying equipment.
- With a brush, oil can or cloth.
- By submerging the parts to be treated in the product
- Parts which have become wet, may be treated with Spanjaard Spark even while still damp, as the products acts immediately. When wet parts are immersed directly in the product without having been dried, the moisture forms an emulsion with Spanjaard Spark. This in no way affects the water dispersing efficiency of the Spanjaard Spark, provided the amount of emulsified water does not exceed 50%.
Available Packing
Spark - 150ml aerosol, 300ml aerosol, 5 litre, 20litre, 210litre
Spark Non-Flammable - 500g aerosol, 5litre, 20litre, 210litre.
Contact our sales consultant in area:
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei
Malaysia
