Description
Behringer PMP1000 Powered Mixer Specifications
-
Microphone Inputs
-
Type: XLR, electronically balanced, discrete input circuit
-
Frequency Response: <10 Hz-155 kHz (-1 dB), <10Hz- >200 kHz (-3 dB)
-
Gain: +10 dB, +60 dB
-
Max Input Level: +12 dBu @ +10 dB gain
-
Impedance: approx. 2.6 k ohms balanced/ 1.3 k ohms unbalanced
-
Signal-to-Noise Ratio: 109 dB/ 112 dB A-weighted (0 dBu IN @ +10 dB gain)
-
Distortion (THD+N): 0.002% / 0.0018% A-weighted
-
Mono Line Inputs
-
Type: 1/4" TS connectors, balanced
-
Impedance: approx 20k ohms
-
Max Input Level: +21 dBu
-
Stereo Line Inputs
-
Type: 1/4" TRS connectors, unbalanced
-
Impedance: >3.6k ohms
-
Max Input Level: +22 dBu
-
Equalizer
-
Low: 80 Hz / +/- 15 dB
-
Mid: 2.5 kHz / +/- 15 dB
-
High: 12 kHz / +/- 15 dB
-
CD/Tape Input
-
Type: RCA
-
Impedance: approx 3.6 k ohms, balanced
-
Max Input Level: +21 dBu
-
Main Preamp Outputs
-
Type: 1/4" TRS connectors, unbalanced
-
Impedance: approx 150 k ohms, unbalanced
-
Max Input Level: +21 dBu
-
Monitor Preamp Outputs
-
Type: 1/4" TRS connectors, unbalanced
-
Impedance: approx 150 k, unbalanced
-
Max Input Level: +21 dBu
-
Stereo Outputs
-
Type:RCA
-
Impedance: approx 1k ohms
-
Max Output Level: +21 dBu
-
Loudspeaker Outputs
-
Type: compatible to Neutrik Speakon
-
Load Impedance
-
Main L/R: 4-8 ohms
-
Monitor/Main Mono: 4-8 ohms
-
Main Mono/Main Mono: 4-8 ohms
-
Bridge: 8-16 ohms
-
DSP
-
Converter: 24-bit Delta-Sigma, 64/128-times oversampling
-
Dynamics D/A: 90 dB
-
Sampling Rate: 46.875 kHz
-
Delay Time: max 5s
-
Signal Run Time (Line in>>Line out): approx 1.5 ms
-
Display
-
Amplifier (Power Amp Output)
-
Power @ 4 ohms: 2 x 130 w
-
Power @ 8 ohms: 2 x 90 w
-
Power @ 8 ohms (Bridge): 500 w
-
Power Supply
-
Mains Voltage: 100-240 V~, 50/60 Hz
-
Power Consumption: 500 w
-
Fuse: T 5 A H 250V
-
Mains Connector: Standard IEC receptacle
-
Physical/Weight
-
Dimensions: 4 7/8 x 15 3/8 x 16 ¾ inches
-
Weight: 15.435 lbs
More detail about KH Pro Sound & Light Sdn Bhd
Malaysia
