Impact Tester

Impact Tester

Category: Impact Available
For more information, visit our official website at lnbtec.com

Description

Impact test describes a method for evaluating the resistance of a dry film of paint,varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight.

The coating under test is applied to suitable, thin(normally metal)panels. After the coating has cured, a standard weight is dropped on the each panel from a height that will cause deformation of the coating and the substrate. The test can be carried out with the coated side of the panel facing upwards(i.e.towards the falling weight)or downwards(i.e away from the weight).By gradually increasing the height from which the weight drops, the point at which failure occurs can be determined.Films generally fail by cracking, which is made more visible by the use of a magnifier.

The test can be carried out:

---either as a “pass/fail” test, the test being carried out from one drop height and with a specified mass, so as to test compliance with a particular specification.

---or as a classification test, to determine, by gradually increasing the drop height and/or the mass, the minimum mass and/or drop height for which the coating cracks or peels from its substrate.

Biuged offers many different types impact testers according to different standards. These impact testers consist of a solid base with a guide tube support, some different weights hammers(falling weights)and some different diameters punches. Users can choose different size and weight hammer to simulate paint used different environments.
 

Ordering Information 

Technical Parameter↓

BGD 305

Heavy-Duty Impact Tester

BGD 306

ISO Impact Tester

Features

◆ Latest design make changing punch,weight and die become more easy and faster.

◆ The aluminum oxid guide tube is produced by special technology, never fade and rust.

◆ Special structure design make impact groove won’t deviate forever, no calibration.

◆ Come with Calibration Certificate.

◆ Ring slot(stops) for height limitation, convenient for operator to adjust different impact depth.

◆ The aluminum oxid guide tube is produced by special technology, never fade and rust.

◆ Guide tube is produced by special mould, the gap with weight is controlled precisely.

◆ Come with Calibration Certificate.

Instrument scale length

0-100cm(40inch)

Graduation

1cm

Falling Weights

1000g(2 pcs)
300g(1 pc)

2 lb(2 pcs)

Main weight with indenter:1000g(1 pc)

Additional weight:1000g(1 pc)

Additional weight:2000g(1 pc)

Indenter Diameter

Ф 12.7mm(1/2 inch)

Ф 15.9mm(5/8 inch)

Ф 20 mm

Die inside Diameter

Ф 16.3mm

Ф 27 mm

Standards

ASTM D 2794

ISO 6272.2

ISO 6272.1

 

More detail about LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.
LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.
LUX & BRILLIANCE TECHNOLOGIES SDN. BHD. Measuring Equipment Wholesaler Malaysia, Coating Instruments Supplier Penang, Hardware Tools Supply Kuala Lumpur (KL), Selangor ~ LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.
Contact Us flagMalaysia