HannYa Ip5x/Ip6x Sand Dust Resistance Weather Spraying Ip Rain Spray Test Chamber

HannYa Ip5x/Ip6x Sand Dust Resistance Weather Spraying Ip Rain Spray Test Chamber

Category: HannYa Ingress Protection Test Chamber Available
For more information, visit our official website at hannyatesting.com

Description

HannYa Ip5x/Ip6x Sand Dust Resistance Weather Spraying Ip Rain Spray Test Chamber

 

This Programmable rubber plastic Rain Test Chamber is used to simulating the lighting, auto parts, household appliances and other products in condition of moisture or rain , to see the influence of water to the products. Through this can test the resistance to the rain penetration and moisture proof ability of products.

Standards:

IEC60529 , ISO 20653 , GB2423.38 - 90 , GB5170.20 -90 , GB 4208-93, IPX4 waterproof test methods.

Specifications:

Swing pipe radius

R400mm

Test chamber size(L*D*H)

900*900*900mm

External size(L*D*H)

1350*1120*1770mm

Spray hole size

Diameter:0.4mm

Swing pipe internal diameter

15mm

Sample turntable diameter

Diameter:400mm

Flow

1.1L/min±5% (IPX3) ; 1.8L/min±5% (IPX4)

Turntable bearing

50kg

Turntable height range

350-600mm

Turntable rotation speed

1-5r/min(precise and adjustable)

Turntable rotation mode

Always forward / reverse alternating

Swing tube angle

120º(IPX3),350º(IPX4)Or custom settings

Power

AC220V±10% ;50Hz, 1KW

Water source conditions

1. The user is required to configure water source for the equipment at the installation site, with the water pressure not less than 0.2MPa, and install 4-point faucet.

2. The faucet shall not be more than 2m away from the equipment


Manufacturer #Indonesia #Thailand #Philippines #Singapore #Vietnam

More detail about Redmark Industry Sdn Bhd
Redmark Industry Sdn Bhd
Redmark Industry Sdn Bhd Tensile Machine Supplier KL, Testing Machine Dealer Selangor, Temperature Humidity Chamber Malaysia ~ Redmark Industry Sdn Bhd
Contact Us flagMalaysia