HannYa Programmable Thermal Shock Test Chamber High Low Temperature Shock Test Machine

HannYa Programmable Thermal Shock Test Chamber High Low Temperature Shock Test Machine

Category: HannYa Thermal Shock Test Chamber Available
For more information, visit our official website at hannyatesting.com

Description

HannYa Programmable Thermal Shock Test Chamber High Low Temperature Shock Test Machine

Thermal shock machine can be used to test the structure of the material or composite material, in an instant by a very high temperature and low temperature continuous environment can bear degree of to in the shortest time test its due to thermal expansion and contraction caused by the changes of chemical or physical damage. Applicable objects including metal, plastic, rubber, electronics and other materials, to improve their products as the basis or reference.

The chemical change or physical damage caused by thermal expansion and contraction of the sample can be detected in the shortest time.

Standards:

1. GB/T2423.1-1989
2. GB/T2423.2-1989
3. GB/T2423.22-1989
4. GJB150.5-86
5. GJB360.7-87
6. GJB367.2-87 405
7. SJ/T10187-91Y73
8. SJ/T10186-91Y73
9. IEC68-2-14
10. GB/T 2424.13-2002
11. GB/T 2423.22-2002
12. QC/T17-92
13. EIA 364-32

Product Descriptions

Imported compressor Imported touch screen controller  Unique Apertune Pin Hole Closed design of condenser Schematic Diagram of Working Principle
The high and low temperature thermal shock test chamber is a necessary test equipment in the material industry such as metal, plastic, rubber, electronic, etc and used for testing the material structure of composite material.

The chemical change or physical damage caused by thermal expansion and contraction of the sample can be detected in the shortest time. It is divided into two-zone type and three-zone type and the different and product conforms to the requirements of GB/T2423.1-2008 Test A, GB/T2423.2-2008 Test B, GB-T10592-2008,GJB150.3-198, GJB360A-96 method 107 temperature impact test.

Specification 

Inner Size(mm) 400×350×300 400×500×400 500×600×500 500×750×600
Temperature Range High temperature chamber:RT~+150°C Low temperature:RT~-60°C
Temperature Deviation Less than ±2°C
Temperature Conversion Time Less than 10S
Temperature Recovery Time Less than 5min
Material

External material: SUS#304 Stainless steel plate

Internal material:SUS#304 Stainless steel plate

Coolting System

Water-cooled or air-cooled,

Tecumseh compressor in France,

Environment friendly refrigerant

Controllor Programmable temperature controllor
Temperature Sensor PT 100 *3
Setting Range

TEMPERATURE : -100.00+200.00°C

/ TIME : OH1M ~ 9999H 59M

/ CYCLE ~ 10000 CYCLE

Resolution TEMPERATURE : 0.01°C / TIME : 1 MIN
Output Mode PID + PWM + SSR CONTROL METHOD
Simulated Load IC (KG) 3.5kg
Standard Accessories Cable hole, lighting equipment
Cooling System Water-cooled/air-filled type
Power AC380V/50HZ Three-phase four-wire ac power
Additional Features

The outlet and return it checks for taste known control

/CM BUS (RS-485) remote monitoring management system

/Ln2 liquid nitrogen rapid cooling control device

Remarks

It can be customiazed according to customer demands.

Technology index refer to product description.Delivery time within 45days.



Manufacturer #Indonesia #Thailand #Philippines #Singapore #Vietnam

More detail about Redmark Industry Sdn Bhd
Redmark Industry Sdn Bhd
Redmark Industry Sdn Bhd Tensile Machine Supplier KL, Testing Machine Dealer Selangor, Temperature Humidity Chamber Malaysia ~ Redmark Industry Sdn Bhd
Contact Us flagMalaysia