Description
MAKITA PO5000C 125mm (6'') RANDOM ORBIT POLISHER
FEATURES
-
Selectable two rotaion mode: Random orbit with forced rotation mode for rough polishing & Random orbit mode for fine polishing
-
Random orbit with forced rotation mode is orbital action with forced rotation of the pad for rough polishing such as surface treatment
-
Random orbit mode is orbital action with free rotation of the pad for fine polishing
-
Variable speed control by trigger enables to adjust RPM during opration
-
Wide variety of optional accessories (Pad, Sponge pad, Felt pad, Wool pad)
SPECIFICATIONS
Continuous Rating Input : 900 W
Pad Size : 125 mm (5'')
Orbits Per Minute (OPM) : 0 - 6,800
Orbit Diameter : 5.5 mm (7/32'')
Strokes Per Minute (SPM) : 0 - 13,600
No Load Speed (RPM) : 0 - 780
Dimensions (L x W x H) : 451 x 148 x 126 mm (17-3/4'' x 5-7/8'' x 5'')
Net Weight : 2.8 - 3.0 kg (6.2 - 6.5 lbs.)
Power Supply Cord : 4.0 m (13.1 ft)
STANDARD EQUIPMENT
Hex Wrench
NOTE
Items of standard equipment and specifications may vary by country or area.
Net weight and dimensions may differ depending on the type of battery(ies) used.
All pictures shown are for illustration purpose only. Continuous Usage Time/ Work Amount: Actual performance may vary based on application.
WARRANTY
Every Makita Product is thoroughly inspected and tested before leaving the factory. Subject to thefollowing terms and conditions,
the Product (Tool, Battery, Charger) is warranty against defective materials and manufacturing defects for a period of
twelve (12) months from the date of purchase (applicable for purchases made from 1st October 2017 onwards) as evidenced from the sale or tax
invoice (with tool serial number) and Makita Authorised Service Centre or Makita Service Centre undertakes, at our option,
to repair or replace, free of charge.
Conditions of warranty
This warranty will NOT cover or shall be null & void in any of the following events even during the warranty period:-
1. Damage resulting from normal wear and tear (Carbon brush/ holder/ cap, switch, gear, grinding/ cutting wheels, bits, saw blades, etc.,)
2. Damage resulting from use of improper accessories, non genuine replacement parts, disassembly, tampering, alteration and repairing in
any way that affects its performance.
3. Damage resulting from negligence, accident, disaster, improper storage or maintenance, abuse and misuse in evident caused by overloading the
tool beyond its capacity.
4. Abnormal voltage or the usage of generator, wrong usage not in accordance with the Operating Manual.
5. If the serial number on the tool, seal on the battery and charger has been defaced or removed.
6. If the receipt or invoice that display the date of purchase could not be present
More detail about Protools Hardware Sdn Bhd
Malaysia
