The Kronenflex cutting-off wheels A 24 N Supra deliver a high removal rate when used for work on
When used with a hardness that perfectly matches the application at hand, they achieve high aggressiveness and a long service life. They are used in combination with handheld angle grinders.
The hardness of the cutting-off wheel is defined as the resistance the combination of bonding agent and abrasive grain exerts against grain shedding. When paired with an angle grinder, the cutting-off wheel will remove material from the workpiece. The work process causes the grain on the wheel to become dull and crumble off. The exhausted grain should break out of the bond to allow the user to work with new grain at all times. The harder the material to be processed, the softer the Kronenflex cutting-off wheel needs to be. If the bond is too hard, the aggressiveness of the cutting-off wheel will drop quickly. This decline will cause the wheel to heat up and glaze The A 24 N Supra is a soft Kronenflex cutting-off wheel that is ideally suited for a hard material such as stainless steel.
The Kronenflex cutting-off wheels come with an expiration date that is indicated on the metal ring at the centre of the discs. Once this date has elapsed, the wheels must no longer be used in combination with angle grinders.
| Diameter /mm | Thickness /mm | Bore /mm | Form | Vmax m/s | Max. RPM | structural shape | Cat.number | |
|---|---|---|---|---|---|---|---|---|
| 115 | 2.5 | 22.23 | G | 80 | 13,300 | depressed centre | 3020 | |
| 125 | 2.5 | 22.23 | G | 80 | 12,200 | depressed centre | 2951 | |
| 150 | 2.5 | 22.23 | G | 80 | 10,200 | depressed centre | 235377 | |
| 180 | 3 | 22.23 | G | 80 | 8,500 | depressed centre | 13469 | |
| 180 | 3 | 22.23 | H | 80 | 8,500 | flat | 13455 | |
| 230 | 3 | 22.23 | G | 80 | 6,600 | depressed centre | 13477 | |
| 230 | 3 | 22.23 | H | 80 | 6,600 | flat | 13463 |
