AirCube COM2 TH Portable Air Sampler

• Light, compact, weight not over 8.0 kg
• Usability flow range among 0.4 and 30 liters/minute with a single dynamic cycle
• No useless adapter for working at low flow rates
• Long-lasting battery pack guaranteeing extended sampling sessions
• Pump to a single head membrane
• Volumetric counter incorporated as required by the current regulations
• Flow reading with Mass Flow Meter and with data integration Compliant with the norms: RoHs-2006 and the UNI-EN.12919:2001

The era of samplings with long interminable settings can be considered over with the new AirCube™ COM2 TH portable sampler. With just a few operations in the user-friendly preparation menu the sampler is immediately ready for a new sampling process.

The times of manual By-Pass or inaccurate and impractical calibrated orifices for high and low flows are over. You just need to set the desired flow and then let the sampling begin.

With the flow range included among 0.4 and 30 liters per minute in a single dynamic scale, the AirCube™ COM2 TH has no competitors! The first and only ultra compact The AirCube™ COM2 TH sampler is the true compact in the category with only 24 cm (per side) and 27 cm (height) but with inside the dry volumetric counter as required by the most common current norms.

Unique in its category, equipped with a membrane pump powered by 12V DC elevated flow range and back pressure compensation over 2200mm/H20.

The AirCube™ COM2 TH constant flow sampler belongs to the second generation of portable successful line of samplers manufactured by AMS Analitica.

New for its compactness, lighter in weight, has an exclusive proportional valve for a precise suction flow adjustment. The AirCube™ COM2 TH sampler is adjustable with operational flow included in a single dynamic range among 0,2 and 30 liters per minute without the assistance of by-pass valves and without using particular regulators for operation in the low-flow range. Unique in its category, the AirCube™ COM2 TH sampler is powered by rechargeable batteries and directly from the electrical power network without the use of external power packs. The new microprocessor board with high-resolution, back light graphic display allows an easy and intuitive data setting and immediate readings during operational sampling phases, real time readings all of the information reported to it such as:

• Immediate flow and average flow of the session,
• instantaneous dry gas meter temperature and average session temperature,
• instantaneous environmental temperature and average session temperature,
• instantaneous and average atmospheric barometric session pressure,
• Partial volume sampled and sampling time. Furthermore, still from the display it is possible to follow the progress of the sampling graphically distributed on the base of aspiration flow and time. This option allows the verification and validation of the sampling validating the data with the calculation of the standard deviation.

Additional features:

• Flow adjustment range 0.2-30 liters/minute
• Maximum operational flow 28 liters/minute (tested with 47 mm Fiberfilm filter 1800 mm/H20)
• Maximum attainable compensation: 2200 mm/H20
• Controlled electronic compensation of loss of load
• Single head membrane aspiration pump
• Pulse attenuator with pressure control incorporated
• Automatic flow regulation of the aspiration flow with patented proportional valve
• Sampling time and volume setting directly from the keyboard
• Sampling flow setting directly from keyboard
• Instantaneous detection and calculation of the average for:
• Dry gas meter temperature
• Environment temperature
• Atmospheric barometric pressure
• Aspiration flow
• Wind speed and direction (when the sensor has been installed)
• Graphic viewing of the sampling progress with calculation of the standard deviation
• Remote control by way of GSM/GPRS data card chance (Optional)
• Sequential group management with solenoid valves for particles and gas chance
• Total volume detectable from the integrated volumetric counter
• Setting of the standardization temperature chance
• PC board conformed to the RoHS-2006 norm requirements
• Conforms to the EN-12919:2001 norm
• Dual power feed with rechargeable batteries or with 220V standard network electrical power without external power packs or transformers

Physical Features

• Weight 8 Kg.
• Dimensions: 245x245x270 mm (LxDxH)
• EC Conformity on Electromagnetic Compatibility 89/336/EEC referred to the EN 50081-1, EN 6111- 6-2, EN 55014-1, EN 61326-1 end EN 60204-1:1997-12 norms regarding electrical safety tests of the device
• 12V DC power feed with Power Pack Com battery pack (Optional 600/ PP014A3COM2)
• Electrical power feed from the 220V / AC network with standard cable

It is possible to connect 8 place modules to the AirCube™ COM2 TH for sequential particles sampling and the new sequential gas sampling device with the inclusion of GasCheck Basic absorbent sampling tubes.

The AirCube™ COM2 TH sampler is also available in the ISO version, able to carry out stack sampling with adjustment calculation of the suction flows in real time conforming to the requirements of the ISO 9096 norms.

The new sampler AirCube™ COM2 ISO, in a single small and light weight device, is able to acquire all of the parameters inside thestack ducts automatically regulating during sampling conditions.

The sampling device supplied with user manual, calibration certificate, test report, ac plug cable, and RS232 serial cable, USB key to data download, SDC2000 software to display and data download.


Order Information: