VETO PRO PAC TECH PAC

Tech Pac - Backpack Tool Bag
VPP10070

PRODUCT SPECIFICATIONS:
Height (H): 19.5” (49.5cm)
Width (W): 13" (33cm)
Depth (D): 10" (25cm)
Handle Height (HH): 22" (56cm)
Weight (empty):  10 lbs (4.5kg)
Internal Volume: 1550in3 (25L)
Max Payload: 50lbs (23kg)

MAXIMIZED TOOL STORAGE CAPACITY:
Vertical Tool Pockets: 46 interior and exterior tool pockets of various sizes
2 Storage Bays- 4 Storage Platforms
Manifold Gauge and Hose Storage Pocket
D-Rings: 4 large and 5 small
Outside Mounted Stainless Steel Tape Clip Holder
Cable and Accessory Pockets
Pocket for a tablet or laptop is 7" X 10"; fits small laptop or most tablets

RUGGED MATERIALS & CONSTRUCTION:
LOAD TESTED: PULLED TO DESTRUCTION AT 830 POUNDS (Handle failed); Hook failed at 200 Pounds
Weatherproof Base: 3mm Injection Molded Polypropylene
Weatherproof Body Fabric: 950 and 1250 PVC Impregnated Denier Nylon
Weatherproof Tool Pocket Fabric: 1800 PVC Impregnated Denier Nylon
Quick Release Metal Hasp: Allows Easy Access to Rear Storage Bay and Creates Positive Shoulder
Strap Load Connection
Internally Stored Aluminum Hook to Hang Bag
Over-Molded Ergonomic Grip
Padded EVA Thermoformed, Ergonomic Back Padding
Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs
D-Rings: Powder Coated Steel
Rivets: Marine Grade Rivets
Stitching: Industrial Strength Double Nylon Stitching

OTHER FEATURES:
Adjustable Padded Shoulder Straps
Tablet/All-Purpose Zippered Pocket
Warranty: 5 Years (see Veto warranty terms and conditions)

Additional Information
VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

• Keep the Zippers Clean & Lubricated
• Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
• Protect the Zippers From Sharp Objects and/or Excessive Heat
• Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
• Don’t Overstuff the Bag
• Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!