E.MIX Finish
Category: WEBER
Purchasable on official site
Description
Remove dust, loose particles, grease and traces of foreign materials that may affect adhesion
Dampen the dry absorbent surface before application of E.MIX Eco Base
Mixing & Installation
Mix thoroughly with appropriate amount of water by using an electrical mixer.
Allow mixture to stand for 10 minutes for additives to dissolve.
stir again the mixture and ready to apply
Apply with steel trowel or spatula
When applying several layers, the layer underneath must be dried before spreading the subsequent layer.
Finished surface can be sanded with fine sand-paper when necessary.
Ceiling may be spray-textured finished
More detail about CHENG HUAT HARDWARE (SENTUL) SDN BHD
