Electrical data ~
Nominal input voltage - 220…240 V
Mains frequency - 0…60 Hz
Input voltage AC - 198…264 V
Input voltage DC - 176…276 V
Total harmonic distortion < 15 %
Power factor λ 0.95
Efficiency in full-load 92 % 1)
Device power loss 20 W
Inrush current 75 A
Max. ECG no. on circuit breaker 10 A (B) 3
Max. ECG no. on circuit breaker 16 A (B) 8
Surge capability (L/N-Ground) 6 kV
Surge capability (L-N) 4 kV
Nominal output voltage 24.2 V
U-OUT (working voltage) 30 V
Nominal output power 250 W
Maximum output power 250 W 2)
Galvanic isolation SELV
Product family features ~
DC mode functionality
Type of protection: IP66 and IP67
Surge protection: up to 4 kV (L-N) / 6 kV (L/N-PE)
Wide operating temperature range: -30…+55 °C
Lifetime: up to 50,000 h (temperature at max. tc )
Dimmable via fully isolated 1…10 V interface
Product family benefits ~
Large range of products from 20 W to 250 W
Installation in very cold and hot environments
Very stable output power
High electronical reversible short-circuit, overload, overtemperature protection
Smart Power Supply: boosting power to turn on cold LEDs
Independent installation possible
Dimming range: 1…100 %
Areas of application ~
Facades, public squares, cruise ships
Signage
Suitable for indoor and outdoor installations
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Malaysia
