Salt Spray Chamber
● Digital Display Time Controller 9.9S-9990HR ANLY AH5R.
● Refilling water automatically when water level is insufficient.
● The whole part of the device is made of Excellent PVC sheet and the inside of the device is reinforced by using a
special lining material. Hence, it is sturdily made and will not transform forever.
● The test chamber is heated from five directions in order to ensure the temperature difference in the chamber must
be kept within±1 Celsius degree.
● Spray nozzle: The nozzle is specially made to enable it to suck up the salt Water and then spray it out in the shape
of mist with considerable high speed. When it falls on the surface of the item being tested , the difference of fallen
mist must be controlled within±0.3ml per 80 square centimeter H.
● HUNTER PRINCIPLE is used to make the saturated air hot and moist and to keep the humidity in the test chamber
required for test.
● Temperature is the pre-requisite condition that will have direct impact on corrosion rate . We use PID temperature
control unit to limit the temperature difference within the range of ±1Celsius degree.
International standards: IS09227,ISO7253,ASTMB117,ASTMB368,JIS-D0201
More detail about LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.