Mitsubishi HMI 10inches Touch Screen GS2110-WTBD-N

Mitsubishi HMI 10inches Touch Screen GS2110-WTBD-N

Category: MITSUBISHI GS SERIES Available
For more information, visit our official website at sem-eq.com

Description



Model : GS2110-WTBD-N

 



Features :
 
Display Section Model Number GS2110-WTBD-N
Display Device TFT color LCD
Screen Size 10"
Resolution 800 x 480 dots
Display Size (W x H) mm (inch) 222 x 132.5 (8.74 x 5.22) (Horizontal format)
Number of Characters 16-dot standard font: 50 chars. x 30 lines (2-byte) (Horizontal format)
Display Color 65536 colors
Backlight LED (not replaceable) Backlight off/screen saving time can be set
Touch Panel Type Analog resistive film
Key Size Minimum 2 x 2 dots (per key)
Simultaneous Press Simultaneous press prohibited (only 1 point can be pressed)
Life 1 million times (operating force 0.98N or less)
Memory C Drive Flash memory (internal) (9MB), for storing project data, OS Life (No. of writings) 100000 times
Built-in Interface RS-422 RS-422, 1ch
Transmission speed: 115200/57600/38400/19200/9600/4800bps
Connector shape: D-Sub 9pin (female)
Application: For communication with controllers
Terminating resister: 330 Ω fixed
RS-232 RS-232, 1ch 
Transmission speed: 115200/57600/38400/19200/9600/4800bps 
Connector shape: D-Sub 9pin (male) 
Application: For communication with controllers and a barcode reader 
For connecting a personal computer (Project data read/write, FA transparent function)
Ethernet Data transfer method: 100BASE-TX, 10BASE-T, 1ch
Connector shape: RJ-45 (modular jack) Application: For communication with controllers 
Application: For connecting a personal computer (Project data read/write, FA transparent function)
For connecting a personal computer (Project data read/write, FA transparent function)
USB USB (Full Speed 12Mbps), 1ch 
Connector shape: Mini-B 
Application: For connecting a personal computer (Project data read/write, FA transparent function)
SD Card SD compliant, 1ch
Supported memory card: SDHC memory card, SD memory card
Application: Project data read/write, logging data save
Buzzer Output Single tone (LONG/SHORT/OFF adjustable)
Protective Structure IP65F (Only the front part of the panel)
Ext. Dimensions (W x H x D) mm (inch) 272 x 214 x 56 (10.71 x 8.43 x 2.21)
Weight (Excl. Mounting Brackets) (kg) 1.3
Compatible Software Package GT Designer3 Version1.105K or later (*1) (English Version)
Note 1: Installation of GS installer is required.
 

Dimensions :

                                  

 

Specifications :
 
Screen Size 10° WVGA
Display Section TFT color
Display Color 65536 colors
Panel Color Black
Power Supply Voltage 24VDC (+10%,-15%), ripple voltage 200mV or less
Power Consumption 7.6W (317mA/24V) or less
With Backlight Off 3.8W (158mA/24V) or less
Inrush Current 17A or less (6ms, ambient temperature 25, maximum load)
Allowable Momentary Power Failure Time Within 5ms
Noise Immunity Conforms to IEC61000-4-4, 2kV (power supply line)
Withstand Voltage 350VAC for 1 minute between power supply and ground
Insulation Resistance 10ΜΩ or higher with an insulation resistance tester (500VDC between power supply terminal and ground)



Parameters :

 
Item Specifications
Operating Ambient Temperature 0 to 55°
Storage Ambient Temperature -20 to 60°
Operating/Storage Ambient Humidity 10 to 90%RH, non-condensing (The wet bulb temperature is 39°)
When the ambient temperature exceeds 40°, maintain the absolute humidity at 40° and 90%
Vibration Resistance Conforms to IEC 61131-2 Conditions Frequency Acceleration Half-Amplitude Sweep Count
Under intermittent vibration 5 to 8.4Hz - 3.5mm 10 times each in X, Y and Z directions
8.4 to 150Hz 9.8m/s² -
Under continuous vibration 5 to 8.4Hz - 1.75mm -
8.4 to 150Hz 4.9m/s² -
Shock Resistance Conforms to IEC 61131-2 (147m/s², 3 times each in the X, Y, and Z directions)
Operating Atmosphere Must be free of lamp black, corrosive gas, flammable gas, or excessive amount of electro conductive dust particles.
Must be no direct sunlight. (Same as for saving)
Operating Altitude (*1) 2000m or less
Overvoltage Category (*2) II or less
Pollution Degree (*3) 2 or less
Cooling Method Self-cooling
Grounding Type D grounding (1000 or less). Connect to panel if unable to ground.
Notes:
1. Do not use or store the GOT under pressures higher than the atmospheric pressure of altitude 0m (0ft). Failure to observe this instruction may cause a malfunction. When the air inside the control panel is purged by pressurization, the surface sheet may be lifted by high pressure. As a result, the touch panel may be difficult to press, and the sheet may be peeled off.
2. This indicates the section of the power supply to which the equipment is assumed to be connected between the public electrical power distribution network and the machinery within the premises. Category II applies to equipment for which electrical power is supplied from fixed facilities. The surge voltage withstand level for up to the raged voltage of 300V is 2500V.
3. This index indicates the degree to which conductive pollution is generated in the environment where the equipment is used. In pollution degree 2, only non-conductive pollution occurs but temporary conductivity may be produced due to condensation. Do not use or store the GOT under direct sun light or in an environment with excessively high temperature, dust, humidity or vibration. For inquiries relating to the status of conforming to UL, cUL, and CE directives and shipping directives, please contact your local sales office.


 


 

More detail about SEM Equipment Sdn. Bhd.
SEM Equipment Sdn. Bhd.
SEM Equipment Sdn. Bhd. Industrial Equipment Manufacturer, Ultrasonic Equipment Supplier, Laser Equipment Supply in Johor Bahru (JB), Malaysia ~ SEM Equipment Sdn. Bhd.
Contact Us flagMalaysia