Description
The Bresle Kit - Sodium Chloride Test Kit complies with the ISO 8502-6 and ISO 8502-9 standards that describe the Bresle Method to assess the level of soluble salts using a Bresle patch or Bresle sampler, distilled water and a conductivity gauge. The conductivity is mainly directly proportional to the concentration of dissolved chloride ions in the solution. The kit includes all the necessary equipment to execute a bresle test that will indicate the contamination of soluble salts on blast-cleaned surfaces prior to coating. Inside the Bresle Kit - Sodium Chloride Test Kit is a conductivity gauge used for the assessment of soluble salt ions as chlorides, sulphates and nitrates.
Contamination of blast-media
The Bresle Kit - Sodium Chloride Test Kit is also suitable to determine the contamination of blast-media in use. This important test described in the ISO 11127-6 and ISO 11127-7 standards helps to prevent that the dissolved salts in the recycled abrasive media or water will not re-contaminate the surface being cleaned.
ORDERING INFORMATION
Art. No. SP7310
Bresle KIT- Sodium Chloride Test KIT
Supplied with: digital conductivity meter, 25x bresle patch, 6x 25ml beaker, 200ml distilled water, 20ml syringe with needle, calibration and rinse solution, magnetic bresle test spot marker.
More detail about Obsnap Instruments Sdn Bhd
Malaysia
