Bike Hanger Wall HS-T019

Feature & Application : 

*Easy Assembly and Disassembly

*Simple practical design 

*kick stand with steel, The bicycle hook material is really good, good steel, the thickness of the foot, weight of 550 grams; overall design, the use of 4 screws fixation, the average distribution in the body and the top, the left side of the main design is reinforced, will not be a bike bend. On the right side of the small plate design, installation and removal of the vehicle will not hinder the front wheel. Hook front arc big, hook angle is appropriate, the front wheel will not fall off. The rubber sleeve length, protection of rim spokes. The main body and the hook is the two part of the welding, high strength, durable.

*Very steady and durable to use

*The product thickness is 2.5mm,diameter is 8.5mm

*A good replacement for your bikes! 

*Material: semi aluminum alloy 

Using the installation method:

Choose the location of the bike in the room, the walls of the load bearing wall. Place the product in the right height and position, and ensure that the bicycle is vertical to the right height and position. According to the 4 screw hole position, in the wall on the hole. Pay attention to the thickness of drill and expansion sleeve, preferably after drilling the holes into the expansion sleeve, feel tight. Into the 4 expansion set with 4 screws of the goods will be fixed on the wall. If the installation of technology is limited, or wall quality is not high, it is recommended that the regular check screws are reliable.

Speical tips:Fix the wall,hook the bike front wheel,with four metal screws and four expansion pipe.fit for all kinds of mountain bike,road bike and fold bike.