The ''AMTG-2'' is a portable feeler gauge. It is used to measure the thickness of non-magnetic materials, such as plastic, glass, ceramic, aluminum, titanium, copper etc... The accuracy of the measurement is not affected by the shape of the samples.
It’s designed by basing on the method of the Hall Effect. Simple and rapid measure as below:
Place the steel ball on one side of the sample and the probe on the opposite side
Move the sample and let the probe to be the tested position
The steel ball will be drawn by the probe automatically
The Hall Effect sensor on the probe measures the distance between the probe tip and the steel ball
AMTG-2 with Probe Main Interface
Advantages:
Non-destructive measure
High resolution 7”touching screen
Dynamic display: measuring value / graph /date / hour / battery life
Full aluminum frame
Fast and accurate measurementof the thickness
Achieving accurate thickness measurementin corners,small radius and some irregular shape.
Displayreal-time measurement value
Max. and Min. mode: Automatic captureofthe maximum or minimum value
Value difference function: Display the value difference between preset value and actual measured value
“CYCLE”function: Record the Max, Min, Average value & Graph during a predefined time. “Delayed start & Auto-stop”function frees the hands of operator and it’s convenient for large-size sample measuring.
Alarm function: Programmable, warns the high or low preset value by sound or visual indication
Password function enables the safety of the calibration data and measuring data.
Can store 9999 measurement data
Technical characteristics:
Measure mode: Normal / High accuracy
Display mode: Real-time / Minimum or Maximum
Resolution: 0.01mmor0.001 mm(0.001''or0.0001'')
Display:TFT screendisplays thereal time reading, minimum reading, alarm status and data info
Outputs:RS-232
Calibration:Multi-point calibration (up to 13 points)
Power : DC8.4V
Battery:Rechargeablelithium battery. Full loaded working time without chargingis approx 2-3 hours.
Units:mm / Inch
Language: English
Dimensions:210 x 150 x 65 mm
Net weight:2 kg (Package weight: 5 kg)
Measure range and accuracy (Custom made for range 0-8mm)
Steel Ball Dia.
Thickness upper limit
Accuracy
4.76mm
6.35mm
1% ±0.003
3.18mm
4.57mm
2%
1.59mm
2.29mm
3%
Standard configuration:
Standard probe with cable and stand
Using manual
Foot switch
Charger
Portable case
Steelballs* and supports
Calibration blocks*
* Steelballs included: 1.59 / 3.18 / 4.76 mm * Calibration blocks included: 0.23 / 0.5 / 1 / 2 / 3 / 4 / 5 mm (Custom-made thickness of block is available)
Redmark Industry Sdn BhdTesting Instruments Kuala Lumpur (KL), Industrial Supplies Selangor, Measuring Equipment Supplier Malaysia, Penang ~ Redmark Industry Sdn Bhd