Pipe and Cable Locator - MXT4 Transmitter

Pipe and Cable Locator - MXT4 Transmitter

分类: Signal Generators 当前有货
欲了解更多详情,请游览我们的官方网站 obsnapinstrument.com

详情

Product name

MXT4 Transmitter

Part No.
MXT4-D

No Periodic Calibration. The MXT4 does not require periodic recalibration. A Product Validation Certificate can be printed using the PC Toolkit. C.Scope authorised Service Centres are also able to provide third-party Test and Calibration Certification should you require it to comply with client or internal regulations.

** Three Year warranty. Conditions apply.

*** Batteries. 4 x D LR20 Alkaline or NiMH Rechargeable batteries housed in a secure battery compartment.

**** In-Built Accessory Tray includes Direct Connection Lead, Auxiliary 10m Earth Lead, Connection Magnets, Earth Stake and Instruction Manual.

Controls
All operation is by push button control as follows:

Audio Indications

Visual Indication
Multi-segment Liquid Crystal Display indicating:

Data Connector
Standard USB Mini B connector. USB 2.0 Compatible

Self Test
Automatic Daily Self Test and manual Self Test function

Output

Connected Mode

Construction

Weight (including batteries, Connection Leads and Earth Stake)
3.4kg (7 lb 7 oz)

Dimensions (with Accessory Tray fitted)
360mm x 180mm x 230mm (14.1” x 7” x 9”)

Battery Type
Internal 4 x ‘D’ (LR20) cells (either alkaline non-rechargeable or NiMH rechargeable)

Battery Life
up to 40 hours intermittent use at 20ºC (68ºF) using alkaline cells

IP Rating
65

Network Rail Approved

Notes
Performance figures stated can be affected by site parameters such as ground conditions, temperature, and strong electromagnetic fields. Specification may be subject to change. All C.Scope Transmitters are in compliance with the essential requirements and other relevant provisions of Council Directive 2014/53/EU (EMC). Compliance has been demonstrated by testing representative samples to the harmonised standards EN300-330 and EN301-489. The essential radio test suites have been carried out and the equipment is in conformity with all applicable directives. All C.Scope Transmitters comply with the essential requirements and other provisions of Council Directive 2011/65/EU (RoHS).

 

Specification MXT4
One Watt Power •​
Four Power Levels •​
Transmitter Frequencies •​
 – 33+131kHz (Connected and Induced) •​
 – 131kHz (Connected and Induced) •​
 – 33kHz (Connected and Induced) •​
 – 8kHz (Connected and Induced) •​
 – 512Hz (Connected) •​
 – 640Hz (Connected) •​
Pulsed / Continuous Output Signal •​
Signal Connection Modes •​
– Direct Connection •​
 – Wraparound •​
 – Induction •​
Automatic Daily Self Test •​
Data Logging •​
Data Transfer via USB •​
High Resolution Backlit Liquid Crystal Display •​
No Periodic Calibration* •​
Three Year Warranty** •​
Batteries*** 4 x D (LR20) Alkaline or NiMH Rechargeable •​
In-Built Accessory Tray**** •​
IP65 •​

 

更多 Obsnap Instruments Sdn Bhd 相关资料
Obsnap Instruments Sdn Bhd
Obsnap Instruments Sdn Bhd Testing Instruments Supplier Malaysia, Measuring Equipments Supply Selangor, Simulation Systems Supplies Kuala Lumpur (KL) ~ Obsnap Instruments Sdn Bhd