TM700: 槟城, 马来西亚, 新邦安拔的首选穎科有限公司

详情

Product outline

UTMII/UTMV series can be easily connected to TM700 with the supplied cable. With the high-speed sampling rate of 20kS/s, TM700 can support the high response time of UTMII/UTMV (1kHz). Fluctuation of torque, rotation speed, and power over a short period of time can be displayed.

Features

Torque monitor for UTMⅡ/UTMV.
Display the curves of torque, rotation speed, and power.
Enable the cogging torque measurement with UTMII/UTMV.
Easy connection to UTMⅡ/UTMV with one cable.
Operation power can be supplied to the UTMⅡ/UTMV (and to the optional rotary encoder as well).
Upper/lower limits & hold function.
Ideal for applications such as nut runners, motor test benches, engine test bench, mixer, wind power generation, etc….

Sample display

External dimension

Specifications

Torque input｜Input for high-speed rotation｜Input for low-speed rotation｜Display section｜External I/O signal｜Interface｜General specifications｜Attachments

Torque input (voltage input)
Signal input range	-5 to +5V Input impedance：1MΩ or more
Accuracy	Non-linearity：within 0.02%FS±1digit Zero drift： within 0.2mV/℃ RTI Gain drift ： within 0.01%/℃
Analog filter	Low pass filter (-6dB/oct.) Select from 10, 30, 100, 300, 1k, 3k, 10k, 30kHz
A/D converter	･ Rate ：20000times/sec ･ Resolution：24bit (binary)　　Approx. 1/30000 against 5V
Monitor output	Output level ：input voltage cuff (for test point)

Input for high-speed rotation (open-collector pulse) : for standard UTMII/UTMV.
Maximum input frequency	In accordance with the output frequency of the UTMⅡ/UTMV series
Minimum input frequency	Select from 15, 10, 5, 3 or 2 rpm (when pulse rate is 4 ppr) Select from 60, 40, 20, 12 or 8 rpm (when pulse rate is 1 ppr)
Minimum detection pulse width	50μs
Circuit configuration	No-voltage contact input (minus common) Open collector connectable (Ic＝Approx. 10mA)

Input for low-speed rotation (open-collector pulse) : for UTMII with rotary encoder option
Maximum input frequency	Approx. 1000rpm
Minimum input frequency	0.1rpm
Minimum detection pulse width	5μs
Circuit configuration	No-voltage contact input (minus common) Open collector connectable (Ic＝Approx. 10mA)

Display section
Display unit	3.5 inch TFT color LCD

External I/O signal
External output (8)	ex) high and low limit outputs
External input (10)	ex) hold control input, digital zero input(DZ)

Interface
Standard	SIF：2-wire serial interface USB：USB interface
Option	D3V：D/A converter voltage output (3ch)

General specifications
Power supply	DC24V (±15%)
Power consumption	6W typ.
Operating conditions	Operation temperature：-10 to +40℃, storage temperature: -40 to +80℃ humidity：85%RH or below (non-condensing)
Dimension	96(W)× 96(H)× 138(D)mm (excluding projections)
Weight	Approx. 1.0kg
CE marking certification	EMC directives EN61326-1

Attachments
	Operation manual･･････1 External input/output connector･･････1 Cable for connecting UTMⅡ/UTMV (2m)･････1 Operating tool (with D/A converter(3ch) option)･･････1

Optional accessories

Model	Description
DTC2	Case for TM700 (with AC power supply)
CA372-I/O	Cable with FCN connector at one-end 3m
CA81-USB	miniUSB-computer USB cable 1.8m
CATM21-M	2m cable for connecting UTMⅡ/UTMV
CATM51-M	5m cable for connecting UTMⅡ/UTMV
CATM(R)21	2m cable for UTMⅡwith rotary encoder connection (non-connector at one end)
CATM(R)21-M	2m cable for connecting UTMⅡrotary encoder
CATM(R)51-M	5m cable for connecting UTMⅡrotary encoder
CN50	FCN series I/O connector (with cover)
CN55	FCN series I/O connector (with diagonal cover)
CN73	D/A converter(3ch) connector
CN90	Waterproof plastic connector for UTMⅡ/UTMV
CN91	Waterproof plastic connector for UTMⅡrotary encoder
GMP96x96	Rubber seal
TSU03	DC lighting surge unit

Download

Product catalogue(PDF)		TM700 catalogue(491 KB)

更多穎科有限公司相关资料