TM400

UTMII/UTMV can be easily connected to TM400 with the supplied cable. With the built-in battery, it can be operated even without power source. Using with UTMII with rotary encoder option, torque-angle (or displacement) relationship can be monitored. With the compact body and the high sampling speed, it is ideal for field use.

 

Features

■ Torque monitor for UTMⅡ/UTMV.
■ With the built-in battery, it can be operated even without power source.
■ Ideal for use with UTMⅡ (square shaft) series with the high-speed sampling at 20kS/s.
■ Easy connection to UTMⅡ/UTMV with one cable.
■ Operation power can be supplied to the UTMⅡ/UTMV (and also to an optional rotary encoder).
■ Torque & rotation speed and torque-angle curve can be monitored.
■ Data recording with memory function and USB.
■ Various display mode: real-time, graph, recorded data, etc….
■ Upper/lower limit & hold function.

Change the display mode by pressing the ESC button

External dimension

 

Specifications

Torque input｜Input for rotation speed｜Encoder input｜Display section｜Interface｜General specifications｜Attachments

Torque input (voltage input)
Signal input range	-5 to +5V Input impedance：1MΩ or more
Accuracy	Non-linearity : within 0.02%FS±1digit Zero drift : within 0.2mV/℃ RTI Gain drift : within 0.01%/℃
Analog filter	Low pass filter (-6dB/oct.) Select from 10, 30, 100, 300, 1k, 3k, 10k, 30kHz
A/D converter	･ Rate : 20000times/sec ･ Resolution : 24bit (binary) Approx. 1/30000 against 5V

Input for rotation speed (open-collector pulse)
Maximum input frequency	In accordance with the output frequency of the UTMⅡ/UTMV series
Minimum input frequency	15rpm
Minimum detection pulse width	50μs
Circuit configuration	No-voltage contact input (minus common) Open collector connectable (Ic＝Approx. 10mA)

 

Encoder input (open-collector pulse)
Maximum input frequency	50kHz

Display section
Display unit	128×64 dots monochromatic LCD (display area: 28 x 57)
Displayed data	Torque, rotation speed, Angle (numeric) Torque-time or torque-angle/displacement curve (graphic) Status display (high, low, OK, and hold)

Interface
Interface	USB

General specifications
Power supply	Built-in secondary battery Maximum operating time: 5 hours AC adopter
Operating conditions	Operation temperature : -10 to +40℃, storage temperature : -20 to +60℃ Humidity : 85%RH or below (non-condensing)
Dimensions	88(W)× 140(H)× 35(D)mm (excluding projections)
Weight	Approx. 500g
CE marking certification	EMC directives EN61326-1 Safety standard EN62311 Please specify requirement for CE marking certified product when making your order.

Attachments
	AC adopter･･････1 Operation manual･･････1 Cable for UTMⅡ/UTMV connection (2m)･･････1 Cable for UTMⅡ rotary encoder connection (2m)･･････1

 

Optional accessories

 

Model	Description
CA81-USB	miniUSB-computer USB cable 1.8m
CATM21-M	2m cable for connecting UTMⅡ/UTMV
CATM51-M	5m cable for connecting UTMⅡ/UTMV
CATM(R)21	2m cable for UTMⅡwith rotary encoder connection (non-connector at one end)
CATM(R)21-M	2m cable for connecting UTMⅡrotary encoder
CATM(R)51-M	5m cable for connecting UTMⅡrotary encoder
CN90	Waterproof plastic connector for UTMⅡ/UTMV
CN91	Waterproof plastic connector for UTMⅡ rotary encoder
TM400 AC CABLE EU	AC cable（For Europe）

Download

Product catalogue(PDF)		TM400 catalogue(479 KB)