About TAKISAWA VTL-750/750M
| ITEMS | UNIT | VTL-750 | VTL-750M | |||
| CAPACITY | Max Swing | mm | 800 | 800 | ||
| Swing Over Saddle | mm | 750 | 750 | |||
| Standard Turning Dia | mm | 260 | 290 | |||
| Max Turning Dia | mm | 750 | 730 | |||
| Max Turning Length | mm | 734 | 666 | |||
| TRAVEL | X-Axis Travel | mm | 390 | 390 | ||
| Z-Axis Travel | mm | 760 | 760 | |||
| SPINDLE | Spindle Speed | Rpm | 2,000 | 2,000 | ||
| Chuck Size | 15”(18”opt.) | 15”(18”opt.) | ||||
| Spindle Nose | A2-A11 | A2-A11 | ||||
| Spindle Through Hole Dia | Mm | 77 | 77 | |||
| Spindle Bearing Diameter | mm | 160 | 160 | |||
| TURRET | Turret No | 1 | 1 | |||
| Type Of Turret | T12 | T12 | ||||
| Turning Tool Shank | mm | 32 | 32 | |||
| Boring Bar Shank Dia | mm | 60 | 50 | |||
| Milling Tool Shank Dia | mm | - | 26 | |||
| FEEDRATE | X-Axis Rapid Traverse Rate | m / min | 20 | 20 | ||
| Z-Axis Rapid Traverse Rate | m / min | 20 | 20 | |||
| MOTOR | Spindle Drive Motor | kw | 22/26(30/37opt.) | 22/26(30/37opt.) | ||
| Turret Index Motor | kw | 1.2 | 1.2 | |||
| Milling Motor | kw | - | 5.5/7.5(7.5/11opt.) | |||
| X Axis Drive Motor | kw | 4 | 4 | |||
| Z Axis Drive Motor | kw | 4 | 4 | |||
| SIZE | Width | mm | 1,850 | 1,850 | ||
| Depth | mm | 2,785 | 2,785 | |||
| Height | mm | 3,450 | 3,450 | |||
| Weight | kg | 9,700 | 9,700 | |||
| •Specification is subject to change without further notice. | ||||||
Malaysia
