About STARVISION V SERIES
| ITEM | Unit | V- 3231 | V- 4231 | V- 5231 | V- 6231 | V- 3234 | V- 4234 | V- 5234 | V- 6234 | V- 8234 | V- 10234 | |
| Travel | X Axis | mm | 3.200 | 4.200 | 4.200 | 6.200 | 3.200 | 4.200 | 4.200 | 6.200 | 8.200 | 10.200 |
| Y Axis | mm | 3.100 | 3.400 | |||||||||
| Z Axis | mm | 1,000 (1,200/1,500 - opt.) | 1,000 (1,200/1,500 - opt.) | |||||||||
| Spindle Nose To Table | mm | 80-1,080 (80-1,280/80-1,580 - opt.) |
80-1,080 (80-1,280/80-1,580 - opt.) | |||||||||
| Spindle Nose To Column | mm | 508 | 508 | |||||||||
| Distance Between Columns (Max. Workpiece Width) | mm | 2,500 (2,450) | 2,800 (2,750) | |||||||||
| Table | Table Dimension (W) | mm | 3.000 | 4.000 | 5.000 | 6.000 | 3.000 | 4.000 | 5.000 | 6.000 | 8.000 | 10.000 |
| Table Dimension (L) | mm | 2.000 | 2.400 | |||||||||
| T-slot (Width x Number x Pitch) | - | 28x11x180 | 28x13x180 | |||||||||
| Max. Table Load | kg | 13.000 | 15.000 | 17.000 | 19.000 | 11.000 | 13.000 | 15.000 | 17.000 | 21.000 | 25.000 | |
| Feed | Rapid Feed- Rate (X/Y/Z) | m/min | 20/20/12 | 20/20/12 | ||||||||
| Cutting Feed- Rate | mm/min | 10.000 | 10.000 | |||||||||
| Accuracy | Position Accuracy | mm | ±0.005/ 300; ±0.015/ full travel | ±0.005/ 300; ±0.015/ full travel | ||||||||
| P0.03 | P0.04 | P0.03 | P0.04 | |||||||||
| Repeatability | mm | ±0.002 | ±0.002 | |||||||||
| mm | Ps0.023 | Ps0.025 | Ps0.023 | Ps0.025 | ||||||||
| ATC | Tool Storage Capacity | pcs | 24 (32/40 - opt.) | 24 (32/40 - opt.) | ||||||||
| Max. Tool Length | mm | 300 | 300 | |||||||||
| Max. Tool Weight | kg | 8 | 8 | |||||||||
| Max. Tool Size (Full Tools) | mm | Ø75 | Ø75 | |||||||||
| Max. Tool Size (Next Pocket Empty) | mm | Ø130 | Ø130 | |||||||||
| Other | Power Consumption | kVA | HSK-A100: 130 (HSK-A63: 110 - opt.) |
HSK-A100: 130 (HSK-A63: 110 - opt.) | ||||||||
| Pneumatic Input Pressure | kg/cm2 | 6.5x2 | 6.5x2 | |||||||||
| Machine Weight (Approx.) | tons | 42 | 46 | 52 | 57 | 46 | 50 | 56 | 61 | 71 | 91 | |
| Machine Floor Space (LxWxH) (Approx.) |
m | 10.8x 7.5x 5.8 |
12.8x 7.5x 5.8 |
14.8x 7.5x 5.8 |
16.8x 7.5x 5.8 |
10.8x 8.1x 5.8 |
12.8x 8.1x 5.8 |
14.8x 8.1x 5.8 |
17.6x 8.1x 5.8 |
22.1x 8.1x 5.8 |
26.5x 8.1x 5.8 |
|
| •Specification is subject to change without further notice. | ||||||||||||
Malaysia
