A polymer modified cement based thin render, specially designed to correct surface alignment and imperfections, with a single application thickness of 6 – 12 mm. Can be troweled to sponge finish.
-To be used on concrete, cement rendered wall, hollow block, brick walls and aerated light weight block.
-Ceramic tiles and natural stones can be fixed on finished surface
Features:
-Pre Mix Of Cement And Stone Together.
-More Strong Adhesive Strength Compare To Cement Alone.
-Fill Up Gap HoleOn Floor Or Wall.
-Combination Of Graded Sand, Grey Cement And Chemical Additive.
-Store In Dry Place.
Special Features:
-Ready To Use Premix Mortar Mix For Plastering Internal And External Brick And Cement Wall Surface.
-Use Special Formulated Blend Of Selected Graded Sand, Grey Cement, And Chemical Additive.
-Special Formulated Material Helps To Reduce Hairline Cracks.
-More Strong Adhesive Strength Compare To Normal Cement without Stone.
-Suitable For Interior And Exterior Place.
-Able To Fill In Floor Hole And Wall Hole.
-Easy To Use By Simply Add Clean Water Into Premix Plaster
-Special Used For Bricklaying, Or Ready To Plaster On Bricks Wall.
IDEAL Surface:
-Brick Wall, Hollow Block, And Other Masonry Surfaces.
Direction Of Use:
Surface Preparation:
Surface To be Plastered Must Be Sound And Free From Dirt And Foreign Materials That Will Affect Adhesion.
Application:
Add Approximately 6-7 Litre Of Clean Water To 25kg Of PYE Premix Plaster. Use Electric Drill Mixer Mix And Thoroughly For 3-5 Minutes To A Workable Consistency.The Mixture Will Remain Workable For 15-30 Minutes Depending On-Site Condition.
Coverage:
The Leveling Coat Thickness Is Between 6mm -20mm /Application And The Coverage Is Approximately 1.6kg/m2/mm
Cleaning:
Clean Tools With Water Immediately After Use.
Malaysia
