MACHINE LASER CUTTING GLORYSTAR GS-CEL Series : 马来西亚的首选 IPM TECHNOLOGY SDN BHD

详情

About GLORYSTAR GS-CEL Series

Glorystar GS-Cel Series Feature

Gantry-type segmented bed frame with intelligent exchange table, for efficient cutting
Industry's largest Z-axis travel and height, suitable for cutting square tubes and H-beam up to 400mm.
High negative pressure automatic partition dust removal, efficient and environmentally friendly.
Intelligent anti-collision detection device and fully closed outer case, uniques within the industry, for guaranteed protection.

ITEM	GS-4020CEL	GS-6020CEL	GS-6025CEL	GS-8025CEL
Working Area (mm)	4,000*2,000	6,000*2,000	6,000*2,500	8,000*2,500
X Axis Travel Distance (mm)	2,050		2,550	2,550
Y Axis Travel Distance (mm)	4,050	6,050		8,020
Z Axis Travel Distance (mm)	290
X/Y Axis Positioning Accuracy	≤0.03mm/min
X/Y Axis Repeat Positioning Accuracy	≤±0.02mm
Max. Synthetic Positioning Speed	100m/min
Max. Acceleration	1.4G
Cutting Kerf Width	0.1mm-0.5mm (Actual Measured Value Of Plate Thickness 3mm)
Cutting Surface Roughness	Ra3.2um-Ra25.4um (Actual Measured Value Of Plate Thickness 3mm)
Min Setting Unit	0.001mm
Floor Size (mm)	12,000*5,000	16,150*4,500	16,150*5,000	21,000*5,000
Main Body Dimsntion (mm)	10,700*3,500	15,150*3,500	15,150*4,000	19,500*4,000
	2,000
CNC System	FSCUT (Cypcut)
Screen	27” LCD
Transmission Mode	Double Driver System With Pinion & Rack
Worktable Max. Weight Capacity (T)	2.5	3.7	4.7	6.3
Total Installed Power Consumption (Approximately)	3,000w	27KW
	4,000w	32KW
	6,000w	42KW
	12,000w	120KW
	20,000w	200KW
Power Requirement	AC380V50Hz ; 3P+N+PE
Total Power Protecting Level	IP54

•Specification is subject to change without further notice.