H3C Indoor 802.11ac Wave2 Series

H3C Indoor 802.11ac Wave2 Series

分类: Wi-Fi 5 Indoor 当前有货
欲了解更多详情,请游览我们的官方网站 1stopsecuritysystems.com

详情

H3C Indoor 802.11ac Wave2 Series AP
H3C 802.11ac Wave2 series Access Point (AP) is based on the new generation of self-developed Gigabit 802.11ac MIMO and 802.11ac Wave2 MU-MIMO technology. Compared with existing 802.11ac technology, Wave2 can support simultaneous data transmission to multiple users, and with increased overall throughput.

H3C provides industry broadest portfolio of Wave 2 series AP, which include WA5620i, WA5620, WA5530, WA5320, WA5320E, WA5320H and WA4320H, in which WA5620i has the best in class built-in terminal hardware-aware smart antenna arrays, WA5530 is the leading Wave2 triple band AP, and WA5320H/4320H are some of the first wall plate Wave2 APs. Combined with their compact appearance, H3C 802.11ac Wave2 series AP provides flexible installation such as for wall, ceiling, or other environments.

Featutes:

Smart cloud access and optimal WLAN TCO

H3C 802.11ac Wave2 series AP complies with 802.11ac Wave2 standard and features maximum four streams 1733Mbps wireless transfer rate for 5Ghz (WA5620 series and WA5530) and total 3Gbps speed of combining 2.5Ghz and 5Ghz (WA5530). With the smart adaptive antenna array technology, it can increase the scope of coverage; improve access density and operation stability; provide a better mobile cloud access and wireless network total cost of ownership (TCO).

2.5G Uplink Ethernet port (WA5620i)

WA5620i complies with 802.11ac Wave2 standard, total AP speed reaches over 2.5Gbps. In order to address the issue of the traditional GE uplink transmission bottleneck, WA5620i-CAN support 2.5G Ethernet port providing sufficient bandwidth.

Dual uplinks (Except 5320H&4320H)

H3C 802.11ac Wave2 series AP supports Dual uplink ports, which remove any bottleneck that limits the upstream speed in wireless products with Fast Ethernet ports, and provide a smooth upgrade path that allows for faster transmission and diversified RF deployment strategies.

Dual GE ports also provide uplink transmission backup that will remove a single point of failure on the wired transmission.

Triple band access (WA5530)

H3C innovative triple band technology offers customers 2.4Ghz+5Ghz+5Ghz unparalleled high density and extremely high performance access. The total combined 2.5Ghz and 5Ghz speed can reach 3Gbps.

The triple band access solution is extremely useful in high density environment such as meeting room or classroom.

Install an AP in 3 to 5 minutes, 5 steps only (WA5320H &WA4320H)

Wall plate series AP uses the international standard wall plate design. Installing an AP is just as simple as installing other switching panels. All it takes is 5 steps in less than 5 minutes which effectively accelerates the wireless network deployment process.

Multiple users’ simultaneous communication, breaking wireless competition

H3C 802.11ac Wave2 series AP supports Multi-user MIMO (MU-MIMO) technology, MU-MIMO has become the quintessential feature for wave2 AP. MU-MIMO technology which allows the AP to transmit data to multiple terminal devices simultaneously. According to terminal stream quantity, H3C 802.11ac Wave2 series AP can concurrently transmit data to multiple terminals with single stream. This improves data transmission efficiency, raises the number of users accessing the AP and provides better user experience.

Green design

H3C 802.11ac Wave2 series AP employs a green design which supports dynamic MIMO power saving (DMPS), enhanced automatic power save delivery (E-APSD), and smart identification of real terminal network requirements. It can dynamically adjust the MIMO working mode and efficiently put terminals to sleep from time to time.

H3C 802.11ac Wave2 series AP green AP mode supports single radio standby and allows for more precise control in power saving.

H3C 802.11ac Wave2 series AP supports the innovative per-packet power control technology, which reduces standby power consumption and improves the battery lives of mobile devices without losing packets.

Local forwarding

When H3C 802.11ac Wave2 series AP runs in Fit mode and forwards packets through a wide area network (WAN), they are usually deployed as data access devices in branch offices, while wireless Access Controllers (ACs) are deployed in headquarter. All user data is sent from APs to AC, and centrally forwarded by the AC. H3C 802.11ac Wave2 series AP can convert wireless packets to wired packets avoiding data packets sent through AC but forwarded locally, which significantly saves the WAN link bandwidth.

Dual IPv4/IPv6 protocol stacks (Native IPv6)

H3C 802.11ac Wave2 series AP is fully compliant with IPv6 and implements a dual IPv4/IPv6 protocol stacks. Existing IPv4 and IPv6 wired networks can run in parallel and work seamlessly to register WLAN with WX series ACs, so that it never runs as an information silo.

RealTime Spectrum Guard (RTSG)

RealTime Spectrum Guard (RTSG) is the innovative H3C professional state-monitoring program for the wireless spectrum. H3C 802.11ac Wave2 series AP supports the internal RF data acquisition module to achieve deeply integrated monitoring and real time spectrum protection.

The RTSG Console is integrated into the iMC (intelligent Management Center), and performs data acquisition through the CAPWAP tunnel management and Sensor AP. It can achieve 24x7 wireless signal quality monitoring, trend assessment and unauthorized interference alert. Through active probe and 2.4GHz/5GHz RF interference source (WiFi or non-WiFi) in every band, it provides a graphic representation of real-time FFT plot of the spectral density plot, spectrum diagram, the duty cycle map, event spectrum diagram, channel gain and interference gain. It can also automatically identify the source of interference, to determine the location of rogue wireless equipment, to ensure the wireless network is always in great shape. Combined with H3C iMC iAR (intelligent Analysis Report) module, it can maintain a complete history of RF quality in the coverage area, including its trace and playback, automatically generate customized trend, compliance and audit reports.

To cater for the different supervision demands in user's wireless environment, the RTSG solution can be deployed in either Local mode or Monitor mode. In Local Mode, you can maintain normal user access and data packet forwarding without compromising effective spectrum protection.

End user Admission Domination (EAD)

End user Admission Domination (EAD) integrates network access and endpoint security products, which ensure only complied wireless clients with mandated enterprise security policies can access the network, reducing threat levels from infected wireless clients and raising the bar and improving the overall security of the wireless network. When working with a security policy server, it can remind users, isolate and boot them off the network when their systems are infected or not patched properly.

Remote probing and analysis

H3C 802.11ac Wave2 series AP can work as a remote probing and analysis sensor device. It can intercept WiFi packets nearby and save to a local device in real-time for troubleshooting and optimization analysis. Remote probing can conduct a non-convergent image for working channels, or a polling of all channels to satisfy wireless network monitoring and maintenance requirements.

RF Optimizing Engine (ROE)

H3C 802.11ac Wave2 series AP supports RF Optimizing Engine (ROE), which effectively increases the number of concurrent sessions in middle to high-density access, accomplishes streaming media application acceleration and QoS through character and protocol based RF optimization. Features include multi-user fairness, mixed access fairness, interference filtering, speed optimization, spectrum guide, IPv4/IPv6 multicast signal boost, per-packet power control and intelligent bandwidth guarantee.

Intelligent AP load balancing

H3C 802.11ac Wave2 series AP comes with intelligent load balancing, which spreads the workload according to the number of concurrent users and traffic. If a new incoming user breaks the preset loading limit, AP will check the location of the wireless client in real-time, determine if nearby APs with smaller workload can provide access, and deny the user access only when such AP exists. What sets H3C intelligent load balancing apart from existing load balancing schemes is that it kicks in only if the user is located in an area with overlapping AP coverage, and prevents loss of access when the workload limit is reached but no backup AP exists. This maximizes wireless network capacity while preventing any erratic behavior in load balancing.

Chinese SSID support

H3C 802.11ac Wave2 series AP supports Chinese SSID. Users can assign a name in Chinese with a maximum of 32 Chinese characters, or a name with mixed Chinese and English characters.

Unified management of wired and wireless networks

H3C Intelligent Management Center (iMC) Wireless Service Manager (WSM) provides unified management of wired and wireless networks, adding network management functions into existing wired network management systems. All WSM based wireless products can be managed through the open management protocol.

WSM is SOA complied,modular based, fully expandable and evolving with the growing needs of network management. It offers a web-based management system and a simple and user-friendly management platform for wireless network administrators. When working in iMC and coupled with other modules, it also implements panel management wireless management, troubleshooting, performance monitoring, software version control, deployment configuration management and user access management.

Specification:

Features

WA5620i

WA5620

WA5530

WA5320/WA5320E

WA5320H

WA4320H

Weight

1.06kg

0.925kg

0.7Kg

0.34kg/0.36kg

0.25kg

0.25kg

Dimensions (excluding antenna interfaces and accessories)

220 x 227 x 52mm

225 x 225 x 55mm

183 x 183 x 40mm

 

170 x 170 X35.5mm

86 × 86 × 53.6mm

150 × 86 × 36.8mm

 

 

Speed

1733Mbps (5G)

800Mbps (2.4G)

1733Mbps (5G)

800Mbps (2.4G)

1733Mbps (5G)

867Mbps (5G)

400Mbps (2.4G)

867Mbps (5G)

400Mbps (2.4G)

867Mbps (5G)

400Mbps (2.4G)

867Mbps (5G)

400Mbps (2.4G)

Fixed port

One 100/1000/2500Mbps Ethernet port

One 10/100/1000 Ethernet port

One console port

One USB port

 

Two 10/100/1000Mbps Ethernet port

One console port

One USB port

 

Two 10/100/1000Mbps Ethernet port

One console port

One USB port

 

Two 10/100/1000Mbps Ethernet port

One console port

One USB port

 

Front panel:

Three 10/100/1000Mbps Ethernet

ports

One RJ45 pass through port

One USB port

One console port

Back panel:

One upstream port (10/100/1000Mbps Ethernet)

One RJ45 pass through port

Front panel:

Four 10/100/1000Mbps Ethernet ports (last port supports PoE out)

One RJ45 pass through port

One USB port

One console port

Back panel:

One upstream port (10/100/1000Mbps Ethernet)

One RJ45 pass through port

Local power supply

54V DC

54VDC

48V DC

48V DC

48V DC

48V DC

Built-in antenna

Built-in hardware smart antenna system (operating frequencies: 2.4GHz and 5GHz, gain 10dBi)

Built-in low-E omni-directional antenna system

(operating frequency: 2.4GHz and 5GHz, gain 4dBi)

Built-in low-E omni-directional antenna system

(operating frequency: 2.4GHz and 5GHz, gain 3dBi)

Built-in low-E omni-directional antenna system

(operating frequency: 2.4GHz and 5GHz, gain 3dBi)

Built-in low-E omni-directional antenna system

(operating frequency: 2.4GHz and 5GHz, gain 3dBi)

Built-in low-E omni-directional antenna system

(operating frequency: 2.4GHz and 5GHz, gain 3dBi)

Maximum radio power

24dBm

24dBm

23dBm

23dBm

20dBm

20dBm

Adjustable power

1dBm

1dBm

1dBm

1dBm

1dBm

1dBm

Power consumption

<25W

<25W

<25W

<12.95W

<12.95W

<26W

Working temperature/storage temperature

0ºC~45ºC/-40ºC~70ºC

0ºC~40ºC/-40ºC~70ºC

Working humidity/storage humidity

5% to 95% (non-condensing)

PoE

802.3af/802.3at compatible power supply

Working frequencies

802.11ac/n/a : 5.725GHz-5.850GHz ; 5.47~5.725GHz; 5.15~5.35GHz (China)

802.11b/g/n : 2.4GHz-2.483GHz (China)

Modulation

OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps, DQPSK@2Mbps, [email protected]/11Mbps
MIMO-OFDM (11n): MCS 0-31

MIMO-OFDM (11ac): MCS 0-39

Reset/restoration to

startup configurations

Status light

Protection class

IP41

Safety compliance

GB4943, EN60601-1-2(Medical), UL/CSA 60950-1, EN/IEC 60950-1, EN/IEC 60950-22

EMC

GB9254-2008, EN301 489, EN55022, FCC Part 15, RSS-210

Radio frequency certification

FCC Part 15, EN 300 328, EN 301 893, and the model approval standards of wireless devices by the Chinese Ministry of Information Industry

Health

FCC Bulletin OET-65C, EN 50385, IC Safety Code 6

MTBF

>250000H

更多 IMPACT ARROW SOLUTION SDN BHD 相关资料
IMPACT ARROW SOLUTION SDN BHD
IMPACT ARROW SOLUTION SDN BHD Dahua Supplier Selangor, Hikvision Supply Kuala Lumpur (KL), CCTV System Installer Malaysia ~ IMPACT ARROW SOLUTION SDN BHD