Water-Based PU Bituminous Waterproofing Membrane
Obaproof WP-100HD is a water-based PU Bituminous Waterproofing membrane. It is a liquid type waterproofing coating and cure to form as a seamless, elastic waterproofing layer.
Application:
With brush, roller or spray method apply the first coat of Obaproof WP-100HD on the application surface. Leave to cure for approximately 8 hours before applying second coat.
Coverage:
Obaproof WP-100HD are recommended for complete waterproofing.
Bathrooms and kitchen:
1kg/m² per coat.
Roof, planter boxes, balconies, water tanks and basements,;
1.5kg/m² per coat.
Surface Preparation:
Clean the dusty surfaced, remove cement ash and trashed, ensure the surface is good to received waterproofing.
Advantage:
• Waterbased
• Low voc
• Good bonding strength
•Applicable on damp surface
• Good waterproof
• Moisture cure
• Easy to apply
• High elongation
Application area:
• RC flat roof
• Seamless
• Bathroom
• Planter box
• RC gutter
• Drive way
Application tools:
• Brush
•Roller
·Broom
•High pressure single hose spray machine
Note:
• A protective screed is required after the completion of Obaproof
WP-100HD.
• Avoid being flushed by the rain water for 2 ex-hours after usages.• The Obaproof WP-100HD avoids a long-term being insolated in a sun directly bottom. Suggest a glazed protection layer (exp: sand syrup) on the Obaproof WP-100HD.
• Retaining wall
• Lift pit
· Bathroom
·Balcony
• Car porch roof
Malaysia
