PCE-COG 10 CO/CO2 Meter | PCE Instruments by Muser: 马来西亚的首选 Muser Apac Sdn Bhd

详情

PCE Instruments PCE-COG 10 CO/CO2 Meter

Features

Data memory for 5000 measuring points
Measuring range (CO²) 0 ... 9999 ppm
Export of measurement data in CSV format
Temperature and humidity measurement
Additionally with carbon monoxide sensor
Easy to read 2'' LC display

Description

The carbon monoxide meter has a measuring range of 0 ... 1000 ppm. In addition to the carbon monoxide measurement, the air quality detector also has a carbon dioxide (CO2) sensor with a measuring range of 0 ... 9999 ppm and a temperature and humidity sensor. The air quality detector already covers a large range of measuring tasks. The air quality detector is therefore used, for example, in occupational safety to check the climatic conditions in office workplaces.

During the measurement, the readings are stored on the carbon monoxide meter. Up to 5000 measuring points can be saved on the air quality detector. The CO² and CO content, as well as the temperature and humidity are saved by the air quality detector for each storage point. After a measurement run, the stored measurement values can be viewed directly on the air quality detector.

For further processing, the readings recorded by the carbon monoxide meter can be transferred to a computer. The transfer takes place via the Micro-USB interface of the air quality detector. When connecting the CO and CO² meter to a computer, it is recognized as a mass data storage device. The saved measured values are saved by the air quality detector in CSV file format and can therefore be processed directly.

The built-in 1500 mAh battery in the carbon monoxide meter enables mobile use. To charge the battery, the air quality detector can be connected to a 5 VDC power supply via the micro-USB interface. The air quality detector can continue to be used during the charging process to take measurements. For an optimal and longer-lasting measurement of the air quality detector there is a 1/4 inch connection on the back. With this connection, the air quality detector can be attached to a tripod and aligned.

Technical Specifications

Carbon monoxide (CO)
Measuring range*	0 … 1000 ppm
Resolution	1 ppm
Accuracy	±5 % of measuring range
*The CO measurement refers to an ambient condition of 0 … 40 °C / 32 … 104 °F, 15 … 95 % RH, non-condensing.

Carbon dioxide (CO²)
Measuring range*	0 … 9999 ppm
Resolution	1 ppm
Accuracy	±3 % of measured value ± 75 ppm
*The CO² measurement refers to an ambient condition of 0 … 50 °C / 32 … 122 °F, 0 … 85 % RH, non-condensing.

Temperature
Measuring range	0 … 50 °C, 32 … 122 °F
Resolution	0.1 °C / °F
Accuracy	±2 °C / ±4 °F

Humidity
Measuring range	0 … 100 % RH
Resolution	0.1 % RH
Accuracy	±5 % between 0 … 20 % RH
	±3.5 % between 20 … 80 % RH
	±5 % between 80 … 100 % RH
The humidity is based on a wind speed of 1 m/s. The accuracy is maintained after 30 minutes of acclimatization.

Further specifications
Display	2'' LC display
Measuring rate	1 Hz
Memory	for 5000 measuring points
Storage rate	1 minute, 15 minutes, 1 hour
Units	temperature: °C, °F, CO / CO²: ppm
Alarm when limit values are exceeded	visually and acoustically
Data export	CSV
Connection	1/4“ tripod connection
Interface	Micro-USB for charging the battery and for data transmission.
Power supply (battery)	3.7 V, 1500 mAh
Power supply (power adapter)	primary: 100 … 240 VAC, 50 / 60 Hz, 0.25 A secondary: 5 VDC, 1 A
Operating conditions	0 … 45 °C, 32 … 113 °F, <95 % RH, non-condensing
Storage conditions	-10 … 55 °C, 14 … 131 °F, <95 % RH, non-condensing
Dimensions	54 x 215 x 34 mm / 2.1 x 8.4 x 1.3''
Weight	154 g / 5.4 oz

Delivery Scope

1 x Carbon monoxide meter PCE-COG 10
1 x Micro USB cable
1 x 5V DC power supply
1 x Instruction manual

Downloads

User Manual

更多 Muser Apac Sdn Bhd 相关资料