| model |
PE-FD14N |
PE-FT13N |
PE-LT13N |
| type |
NPN |
NPN |
NPN |
| Detection method |
Diffuse reflective type |
Through-beam type (front) |
Through-beam type (side) |
| Detection distance |
2~30mma¹ |
0-500mm |
0-500mm |
| Minimum detection object |
"0.1mm copper wirea² |
"Opaque objects larger than 2mm, not affected by the color of the object being detected |
"Opaque objects larger than 2mm, not affected by the color of the object being detected |
| Response time |
< td=""> |
| Response frequency |
1KHz |
| Repeatability |
0.05mm or less |
| light source |
Red LED |
| wavelength |
650nm |
| Operating voltage |
DC 12~24V±10% |
| Current consumption |
20mA |
| Action Mode |
Mode selectable, ON when shaded or ON when light enters |
| Spot size |
Approx. "13mm@30mm |
About "3mm@30mm |
About "3mm@30mm |
| Protection Circuit |
Surge protection circuit, short circuit protection, reverse polarity protection |
| Output indicator |
Orange LED (lights up when output is ON) |
| Power indicator |
Green LED |
| Ambient temperature |
-10°C~+55°C (note that it cannot be frozen), storage: -30C~70C |
| Ambient humidity |
35%RH~85%RH, Storage: 359RH~85%RH |
| Ambient illumination |
Self-incandescent lamp: illumination of the light receiving surface ≤ 3000Lux |
| Vibration resistance |
10~55Hz, double amplitude 1.5mm, 2 hours each in X, Y, and Z directions |
| Impact resistance |
500m/S², 3 times each in X, Y, and Z directions |
| Protection level |
lP65 |
| Connection |
Four-wire system, lead-out type, black wire is ON when light enters, white wire is ON when fast light enters |
| Shell material |
PC, Polycarbonate |
| weight |
About 20g |
The transmitter and receiver are about 20g each. |
.png)
Malaysia
