Mahr Metrology - Desktop Formtester MMQ 400: 马来西亚的首选 Obsnap Instruments Sdn Bhd

详情

MarForm MMQ 400 is suitable for universal use for extensive workpiece evaluation according to DIN ISO 1101.
High precision measuring axes in Z and X make every form measuring task possible. MarForm MMQ 400 is available in different versions for:

High precision workpieces
Unusually long workpieces
Large and heavy workpieces
Use in production or in the precision measuring room

Different modules are available with which the MarForm MMQ 400 can optimally be prepared for your requirements:

Motorized or manual centering and tilting table
Vertical axis (Z) with 900 mm, 500 mm or 350 mm measuring length
Horizontal axis (X) with 180 mm or 280 mm measuring length and with digital linear scales in the X and Z axes; high probe position accuracy for measurements requiring high reproducibility
Manual or fully automatic probe with short measuring circuit, high linearity, low measuring force
Path control for fast measuring of a nominal contour

Technical Data

	MMQ 400-2 Z= 350 mm X= 180 mm	MMQ 400-2 Z= 500 mm X= 280 mm	MMQ 400-2 Z= 900 mm X= 280 mm
Roundness deviation (µm+µm/mm measuring height)	0,01 + 0,00025	0,01 + 0,00025	0,01 + 0,00025
Roundness deviation (µm+µm/mm measuring height)	0,02 + 0,0005	0,02 + 0,0005	0,02 + 0,0005
Axial runout deviation (µm+µm/mm measuring radius)	0,02 + 0,0001	0,02 + 0,0001	0,02 + 0,0001
Axial runout deviation (µm+µm/mm measuring radius)	0,04 + 0,0002	0,04 + 0,0002	0,04 + 0,0002
Centering and tilting table	manual / automatic	manual / automatic	automatic
Table diameter (mm)	285	285	285
Table load capacity, centered (N)	600	600	400
Speed (rpm) 50 Hz / 60 Hz	0.2-15	0.2-15	0.2-15
Measuring path, motorized Z (mm)	350	500	900
Straightness deviation / 100 mm measuring path (µm), Z axis	0.15	0.15	0.15
Straightness deviation / total measuring path (µm), Z axis	0.3	0.4	0.9
Parallelism deviation Z-/C axis in tracing direction, measuring path (µm)	0.5	0.8	2
Measuring speed (mm/s), Z axis	0,1-30	0,1-30	0,1-30
Positioning speed (mm/s), Z axis	0,5 -100	0,5 -100	0,5 -100
Measuring path, motorized X (mm)	180	280	280
Straightness deviation /av. 100 mm measuring path (µm), X axis	0.4	0.5	0.5
Straightness deviation / total measuring path (µm), X axis	0.8	1.5	1.5
Perpendicularity X/C axis, measuring path (µm)	1	2	2
Positioning speed (mm/s), X axis	0,5-30	0,5-30	0,5-30
Measuring speed (mm/s), X axis	0,5-10	0,5-10	0,5-10

更多 Obsnap Instruments Sdn Bhd 相关资料