P2500S: 马来西亚的首选 HMI Audio Visual Sdn Bhd

详情

Specs

Size/Weight

Dimensions	Width	480mm
	Height	88mm
	Depth	456mm
Weight	Weight	14kg

Power Supply

Maximum Input Voltage		32.1dB
Power Requirements		AC100V, 120V or 220-240V; 50/60Hz
Power Consumption		320W

100V models		P2500S
Dynamic power; 1kHz 20ms nonclip	2ohms	650W x 2
Dynamic power; 1kHz 20ms nonclip	4ohms; Bridge	1300W
Output power; 1kHz	4ohms	390W x 2
Output power; 1kHz	8ohms	275W x 2
Output power; 20Hz-20kHz	4ohms	310W x 2
	8ohms	250W x 2
	8ohms; Bridge	620W
120V models		P2500S
Dynamic power; 1kHz 20ms nonclip	2ohms	650W x 2
Dynamic power; 1kHz 20ms nonclip	4ohms; Bridge	1300W
Output power; 1kHz	4ohms	390W x 2
	8ohms	275W x 2
	8ohms; Bridge	780W
Output power; 20Hz-20kHz	4ohms	310W x 2
	8ohms	250W x 2
	8ohms; Bridge	620W
230V models		P2500S
Dynamic power; 1kHz 20ms nonclip	2ohms	650W x 2
Dynamic power; 1kHz 20ms nonclip	4ohms; Bridge	1300W
Output power; 1kHz	4ohms	390W x 2
	8ohms	275W x 2
	8ohms; Bridge	780W
Output power; 20Hz-20kHz	4ohms	310W x 2
	8ohms	250W x 2
	8ohms; Bridge	620W
240V models		P2500S
Dynamic power; 1kHz 20ms nonclip	2ohms	650W x 2
Dynamic power; 1kHz 20ms nonclip	4ohms; Bridge	1300W
Output power; 1kHz	4ohms	390W x 2
	8ohms	275W x 2
	8ohms; Bridge	780W
Output power; 20Hz-20kHz	4ohms	310W x 2
	8ohms	250W x 2
	8ohms; Bridge	620W
General specifications		P2500S
Total harmonic distortion		Less than 0.1% (20Hz-20kHz; Halfpower), RL=4ohms
Intermodulation distortion		Less than 0.1% (60Hz:7kHz=4:1; Halfpower)
Frequency response		+0dB, -1.5dB (RL=8ohms, 20Hz - 50kHz)
S/N ratio		100dB
Power band width		10Hz-40kHz
Crosstalk		Less than -70dB
Damping factor		More than 200
Voltage gain		32dB
Input sensitivity		+3dBu
I/O Connectors	Line input / output ports	2x XLR-3-31, 2x 1/4"TRS phone jack
I/O Connectors	Speaker output ports	2x speakON, 2x 5-way binding post, 2x 1/4"Phone jack
Processors		HPF/LPF (25Hz-150Hz sweepable, 12dB/Oct), YS Processing
Protection circuit	Load protection	Power switch on/off mute; DC-fault (power supply shutdown) ,Clip Limiting(THD≧0.5%)
Protection circuit	Amplifier protection	Temp. detection (Heat sink temp ≧90°C) (Operation not restored automatically), VI limiter (RL≦1ohm)
Amplifier class		EEEngine
Cooling		Variable-speed fan
Power requirements		Depend on area of purchase; 100V, 120V, 230V or 240V; 50/60Hz
Power consumption	Music source equivalent	320W
Power consumption	Idling	25W
Dimensions	W	480mm; 18-7/8in
	H	88mm; 3-7/16in (2U)
	D	456mm; 17-15/16in
Net weight		14kg; 30.9lbs
Accessories		Owner’s manual, Security cover (with a hex wrench)

更多 HMI Audio Visual Sdn Bhd 相关资料