USB Data Loggers
Testo 176 T4 - Temperature Data Logger
Testo 176 T4 - Temperature Data Logger

 

Testo 176 T4 - Temperature Data Logger

Muser Apac Sdn Bhd flag
Category: USB Data Loggers Available
Purchasable on official site
For more information, visit our official website at muser.com.my
Visit Official Site Contact Us
Description

testo 176 T4 - Temperature Data Logger
  The testo 176 T4 data logger can measure the temperature at up to four different measurement sites simultaneously. It also has a super size memory for up to 2 000 000 readings, an exceptionally wide measurement range and is compatible with a number of different thermocouple elements making it ideal for professional use in a variety of different fields.

This meter uses a sensor to start up.
 
 
Product Description
 
The testo 176 T4 temperature data logger can tell you at a glance if the temperature of the room or facility is within the prescribed thresholds. It can measure the temperature at up to four different sites simultaneously and has a super size memory that can save up to 2 000 000 readings. This gives you the freedom to read out the logger data at longer intervals, even when measuring cycles are shorter.
 
You will need at least one temperature sensor to use your logger. There is a wide selection of thermocouple sensors ranging from type K, T or J sensors to air, surface or probe sensors available.
 
 
Technical features and benefits in the field
 
The logger’s display provides you with a wide range of valuable information including current measurement values, threshold values, points where these thresholds have been exceeded, min/max values as well as the remaining battery power. And because all these values can be read off directly from the display, there is no need for you to boot up your PC. In addition to this nice little detail, the logger also has a super size memory and an exceptionally long battery life of up to 8 years. This gives you the freedom to read out the logger data at longer intervals, even when measuring cycles are shorter.
 
The  testo 176 T4 data logger is IP 65 protected and can therefore also be used in dusty and dirty work environments. The standard AA batteries can be replaced by the user.
 
 
Possible areas of application
 
 
Programming and analyzing your data logger
 
Choose one of three software versions to program or read out your logger or to analyze the measuring data you have obtained on your PC:
You will need a USB cable (not included) to program your data logger. The data can be transferred to your PC either via USB cable or SD card. Both are available as accessories which can be ordered together with your testo 176 T4.
 
 
Delivery Scope
 
testo 176 T4 temperature data logger with external sensor ports (TC type T, K and J), wall mount, lock, battery, calibration certificate.
 
 
Technical Data
 
Temperature - TC Type K (NiCr-Ni)
Measuring range -195 to +1000 °C
Accuracy ±1 % of mv (-195 to -100.1 °C)
±0.3 °C (-100 to +70 °C)
±0.5 % of mv (+70.1 to +1000 °C)
Resolution 0.1 °C
 
Temperature - TC Type T (Cu-CuNi)
Measuring range -200 to +400 °C
Accuracy ±1 % of mv (-200 to -100.1 °C)
±0.3 °C (-100 to +70 °C)
±0.5 % of mv (+70.1 to +400 °C)
Resolution 0.1 °C
 
Temperature - TC Type J (Fe-CuNi)
Measuring range -100 to +750 °C
Accuracy ±0.3 °C (-100 to +70 °C)
±0.5 % of mv (+70.1 to +750 °C)
Resolution 0.1 °C
 
General technical data
Dimensions 103 x 63 x 33 mm
Operating temperature -20 to +70 °C
Protection class IP65
Channels 4 external
Warranty 2 years
Battery type 1 x Lithium (TL-5903)
Battery life 8 years at 15 min. meas. rate
Memory 2,000,000 measuring values
Storage temperature -40 to +85 °C
 
 
Applications
 
Checking the temperature in super freezers or under cryogenic conditions
 
Specific products must be stored under extremely cold conditions so as to ensure their quality. Therefore, in many laboratories and research facilities you can for instance find super freezers which can be cooled down to -80 °C using liquid nitrogen or dry ice.
In many cases storage under cryogenic conditions is even required. So, particular biological or blood products are for example stored and transported at -196 °C. Special measuring instruments, which are also fit for purpose at such low temperatures, are needed to check these extreme conditions.
 
Monitoring process temperatures
 
For production quality assurance, the temperature must frequently be checked at various points in production processes. Whether it is the air temperature, the temperature of production items themselves or the surface temperature of machines or motors.
Using thermocouple probes, data loggers can also record data in the kinds of extreme temperature ranges that are often to be found in production processes. The probe's fast speed of response contributes here to a good measurement result being achieved even in processes where temperatures change quickly.
 
Checking the flow and return temperature of heating systems
 
The heating period starts in autumn and with it the time for tenants to complain that the apartment cannot be heated to the extent they want as well. Using flexible external pipe wrap probes, you can for instance check the flow and return temperature of individual heaters in a targeted way, so as to identify causes and remedy them.
 
 
 
Downloads
 
Product Brochures
Product brochure testo 176 T3 / testo 176 T4  (PDF, 670.6 kB)
 
Manuals
Instruction manual testo 176  (PDF, 2.8 MB)
 

More detail about Muser Apac Sdn Bhd
Muser Apac Sdn Bhd
Muser Apac Sdn Bhd Testing Instruments Supplier Kuala Lumpur (KL), Malaysia, Monitoring Mapping Systems Supply Selangor, Measuring Equipments Supplies ~ Muser Apac Sdn Bhd
Contact Us flagMalaysia