Testo 835-H1 - Infrared Thermometer plus Moisture Measuring [Delivery: 3-5 days subject to availability]

Testo 835-H1 - Infrared Thermometer plus Moisture Measuring [Delivery: 3-5 days subject to availability]

Category: Infrared Thermometers Available (Qty:1)
Purchasable on official site
RM 2236.00 For more information, visit our official website at muser.com.my

Description

testo 835-H1 - Infrared Thermometer plus Moisture Measuring
  Non-contact temperature and moisture measurements – with only one device. The testo 835-H1 infrared thermometer not only measures the temperature but has an intergrated moisture sensor that allows you to measure moisture too.
 
 
Product Description
 
Perform temperature and moisture measurements on walls, monitor and check air conditioning and ventilation systems, service and inspect industrial systems, ensure that constantly high levels of quality in production processes are maintained: the testo 835-H1 is the ideal all-round device for a wide range of industrial and commercial applications.
 
 
What the testo 835-H1 infrared thermometer plus moisture measuring can do
 
Benefit from state-of-the-art technology and easy handling
 
Delivery Scope
 
testo 835-H1 infrared thermometer plus moisture measuring function and 4-Point laser marking, measurement data management, moisture module, batteries, calibration protocol.
 
 
Technical Data
 

Temperature - TC Type K (NiCr-Ni)
Measuring range -50 to +600 °C
Accuracy ±(0.5 °C + 0.5 % of mv)
Resolution 0.1 °C
 
Temperature - Infrared
Measuring range -30 to +600 °C
Accuracy ±2.5 °C (-30.0 to -20.1 °C)
±1.5 °C (-20.0 to -0.1 °C)
±1.0 °C (0.0 to +99.9 °C)
±1 % of mv (Remaining Range)
Infrared resolution 0.1 °C
 
Humidity - Capacitive
Measuring range 0 to 100 %RH
Accuracy ±2 %RH
±0.5 °C
Resolution 0.1 °C
0.1 %RH
0.1 °Ctd
 
General technical data
Dimensions 193 x 166 x 63 mm
Operating temperature -20 to +50 °C
Housing ABS + PC
Emissivity table 20 values
Laser spot on / off
Standards EN 61326-1:2006
Warranty 2 years
Alarmsignal audible; Optical
Auto-off backlight 30 s*
Auto-off instrument 120 s*
Battery type 3 batteries type AA (or USB operating with PC-Software)
Battery life 25 h (typical 25°C without laser and backlight) 10 h (typical 25°C without backlight)
Display type Dot Matrix
Memory 200 measuring values
Storage temperature -30 to +50 °C
Weight 514 g
*disabled for continuous measurement and USB connection
 
 
Applications
 
Location of thermal bridges and mould formation
 
With the testo 835-H1, you can identify thermal bridges (places on walls, floors and ceilings where there is a greater outflow of heat than at points nearby, mainly due to structural defects) for early detection or identification of structural defects, energy loss and places where there is a risk of mould formation. 
 
Advantages of the testo 835-H1:
 
 
 
Downloads
 
Product Brochures

Product brochure testo 835  (PDF, 1.108 KB)
 
Manuals

Instruction manual testo 835  (application/pdf, 2.024 KB)
Instruction Manual - PC-Software - Testo EasyClimate  (PDF, 3.1 MB)
Short manual testo 835  (PDF, 849.9 kB)
 


Video Demo


More detail about Muser Apac Sdn Bhd
Muser Apac Sdn Bhd
Muser Apac Sdn Bhd Testing Instruments Supplier Kuala Lumpur (KL), Malaysia, Monitoring Mapping Systems Supply Selangor, Measuring Equipments Supplies ~ Muser Apac Sdn Bhd
Contact Us flagMalaysia