Level measurement and point level detection at the belt transfer point
Radar, Capacitive
Radar, Microwave barrier
Process data
Measuring task
Level measurement and point level detection
Measuring point
Silo
Measuring range up to
5 m
Medium
Stones, gravel and sand
Process temperature
-40 … +50 °C
Process pressure
0 … 0 bar
Special challenges
Extremely noisy and dusty environment, abrasion
Application
The transport of coarse and fine bulk solids within a stone processing facility takes place in most cases via conveyor belts. To achieve an even throughput and compensate for volume fluctuations during transport, belt transfer points are integrated in the conveyor line. The incoming bulk material is briefly stored in a buffer silo to prevent belt overfilling. This is the point where the level and the point level must be monitored.
Your benefit
Reliable
Reliable monitoring of silo filling
Cost effective
Optimal utilization of conveyor belt capacity
User friendly
Maintenance-free operation
Recommended products
VEGAPULS 69
Non-contact level measurement with radar at the belt transfer station
Highly reliable even in dusty environments
Maintenance-free non-contact measurement
Maximum operational reliability due to noise insensitivity
Measuring range - Distance
120 m
Process temperature
-40 ... 200 °C
Process pressure
-1 ... 20 bar
VEGACAP 65
Overfill protection with capacitive point level detection at the belt transfer station
Reliable measuring results, unaffected by buildup
Dependable switching point ensured by large gravity weight
Long service life thanks to robust, cut to length cable probe
Process temperature
-50 ... 200 °C
Process pressure
-1 ... 64 bar
Version
Cable ø 6 mm with screening tube without weight
Cable ø 6 mm with screening tube and gravity weight
Cable ø 6 mm with gravity weight
Cable ø 8 mm with abrasion protection without weight
Cable ø 8 mm with abrasion protection and gravity weight
Cable ø 8 mm with gravity weight
PA cable ø 12 mm with screening tube and gravity weight
Malaysia
