|
Product No |
881107 |
881108 |
881109 |
|
|
Model |
SR140P25PWAL-F |
SR140P38PWAL-F |
SR140P50PWAL-F |
|
|
Product No |
881110 |
881111 |
881112 |
|
|
Model |
SR140P25PWAL-T |
SR140P38PWAL-T |
SR140P50PWAL-T |
|
|
Pump ratio |
25x1 |
38x1 |
50x1 |
|
|
Material discharge port diameter |
G3 / 4 (F) |
|||
|
Applicable materials |
Grease: NLGI No. 0 to 3 (excluding slurry) |
|||
|
Air connection diameter |
G3 / 8 (F) |
|||
|
Operating air pressure range |
0.2 to 0.7 MPa |
|||
|
Usable material container |
Equivalent to JIS Z 1620 steel pail, resin container equivalent to this (total height 440mm or less) |
|||
|
usage environment |
Material temperature |
0-60 ℃ |
||
|
Temperature range |
temperature |
0 ~ 80 ℃ |
||
|
Stroke length |
100mm |
|||
|
Discharge rate / cycle |
116.2mL |
76.0mL |
61.2mL |
|
|
Supply air pressure 0.7MPa |
17.5MPa |
26.6MPa |
35.0MPa |
|
|
noise |
84dB (A) max |
83 dB (A) maximum |
84.5 dB (A) maximum |
|
|
Mass (kg) |
F-61.0kg T-63.0kg |
|||
* Lower limit detection sensor can be installed as an option.
(Reed 2-wire DC12 / 24V / AC100 / 200V)
|
854563 |
Pail lift for PWAL |
|
804819 |
Inductor plate (flat) |
|
804820 |
Inductor plate (tube) |
|
804821 |
Regulator assembly |
A punching plate was attached to the bottom of the plate to minimize the remaining material in the can.
