For tensile testing of wire terminals according to IEC, DIN, EN, BS, UL, SAE, MIl and NASA standards
Compact and rugged bench top instrument with hardened scratch-resistant base plate
3 test modes selectable for destructive and non-destructive test, pull and break, pull and hold, pull hold and break *
Constant pull speed in 7 steps selectable between 10…200 mm/min *
Description
The motorized pull tester is a compact bench top instrument to measure the tensile strength of most common solder-free cable joints with end sleeves, pins, solder pins or similar wire terminal components.
Test samples are inserted into the receptacle adaptor, which has 12 different slot widths (from 0.5mm to 6.0mm), covering all the prevalent wire strengths and terminal types. More adaptors are available.
With the optional software the measurement data can be downloaded via the USB interface to MSExcel. It takes only a few minutes to prepare a complete test report with statistical summary as pdf-file (more details please check software FMT-W_Connect).
Technical Specifications
Order No.
FMT-W40C5
FMT-W40K1
Capacity F(nom)*
N
500
1000
Resolution**
N
0.5
1
Tolerance**
% F(nom)
0.5
Temperature coefficient
%/ K
0.02
Reproducibility***
%F
0
Repeatability*
%F
0.25
Hysteresis***
%F
0
Max. operating force*
% F(nom)
120 (autoreverse if exceeded)
Measurement error**
% F(nom)
1.0
Breaking force*
% F(nom)
150
Nominal deflection*
mm
0.15
0.25
Display
Type
LCD, 5 digits, 14mm high
Measuring principle
Force sensor with full-bridge strain gauge and high-speed μ-processor
Measuring rate
Hz (Peak)
~ 1.000
Memory
Statistics memory with display of the mean, maximum, minimum and standard deviation for 1000 measurements
*) according to VDI / VDE / DKD 2638 at 0.2 ... 1 x F (nom)
**) according to DIN 1319-1
***) due to design and application, no independent error contribution
Scope of Supply
Pull tester (desktop unit) complete with test adapter, motor-driven traction, USB interface, CD-ROM with software (without license), data cable and universal power supply. Operating instructions (DE, EN, FR, SP, IT) with CE conformity confirmation, DAkkS calibration certificate, software license, interchangeable adapter and carrying case must be ordered separately.
Muser Apac Sdn BhdTesting Instruments Supplier Kuala Lumpur (KL), Malaysia, Monitoring Mapping Systems Supply Selangor, Measuring Equipments Supplies ~ Muser Apac Sdn Bhd